Skip to main content Accessibility help
×
Home

An improved machine to produce nature-identical snow in the laboratory

  • Stefan Schleef (a1), Matthias Jaggi (a1), Henning Löwe (a1) and Martin Schneebeli (a1)

Abstract

We present an improved machine to produce nature-identical snow in a cold laboratory for reproducible experiments. The machine is based on the common supersaturation principle of blowing cold air over a heated water basin. The moist airstream is directed into a chamber, where it cools and the nucleation of ice crystals is promoted on stretched nylon wires. Snow crystals grow on the wires and are harvested regularly by a new automatic brush rack. Depending on the settings, different snow crystals can be produced, which are shown to be consistent with the Nakaya diagram. The main snow types are dendrites and needles. We prepared specimens from the snow produced by the snowmaker and analyzed them using microcomputer tomography. For dendrites we show that there are natural snow samples that have the same crystal shape and similar microstructural parameters, namely density and specific surface area. The machine can produce suitable amounts of snow for laboratory experiments in an efficient way. As an advantage over previous designs, uniform and reproducible snow samples can be generated under well-defined conditions.

  • View HTML
    • Send article to Kindle

      To send this article to your Kindle, first ensure no-reply@cambridge.org is added to your Approved Personal Document E-mail List under your Personal Document Settings on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part of your Kindle email address below. Find out more about sending to your Kindle. Find out more about sending to your Kindle.

      Note you can select to send to either the @free.kindle.com or @kindle.com variations. ‘@free.kindle.com’ emails are free but can only be sent to your device when it is connected to wi-fi. ‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.

      Find out more about the Kindle Personal Document Service.

      An improved machine to produce nature-identical snow in the laboratory
      Available formats
      ×

      Send article to Dropbox

      To send this article to your Dropbox account, please select one or more formats and confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your <service> account. Find out more about sending content to Dropbox.

      An improved machine to produce nature-identical snow in the laboratory
      Available formats
      ×

      Send article to Google Drive

      To send this article to your Google Drive account, please select one or more formats and confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your <service> account. Find out more about sending content to Google Drive.

      An improved machine to produce nature-identical snow in the laboratory
      Available formats
      ×

Copyright

References

Hide All
Armstrong, RL and Brun, E, eds. (2008) Snow and climate: physical processes, surface energy exchange and modelling. Cambridge University Press, Cambridge
Bones, J and Adams, EE (2009) Controlling crystal habit in a small scale snowmaker. In Schweizer, J and Van Herwijnen, A eds. Proceedings of the 2009 International Snow Science Workshop, 22 September–2 October 2009, Davos, Switzerland, Swiss Federal Institute for Forest, Snow and Landscape Research, Davos, 6771
Breiling, M, Bacher, M, Sokratov, S, and Best, FG (2012) Method and device for producing snow. US Patent 0193440 A1
Flin, F, Brzoska, J-B, Lesaffre, B, Coléou, C and Pieritz, RA (2004) Three-dimensional geometric measurements of snow micro-structural evolution under isothermal conditions. Ann. Glaciol., 38, 3944 (doi: 10.3189/172756404781814942)
Hallett, J and Mason, BJ (1958) The influence of temperature and supersaturation on the habit of ice crystals grown from the vapour. Proc. R. Soc. London, Ser. A, 247(1251), 440453
Heggli, M, Frei, E and Schneebeli, M (2009) Snow replica method for three-dimensional X-ray microtomographic imaging. J. Glaciol., 55(192), 631639 (doi: 10.3189/002214309789470932)
Kaempfer, TU and Schneebeli, M (2007) Observation of isothermal metamorphism of new snow and interpretation as a sintering process. J. Geophys. Res., 112(D24), D24101 (doi: 10.1029/2007JD009047)
Kingery, WD (1960) Regelation, surface diffusion, and ice sintering. J. Appl. Phys., 31(5), 833838 (doi: 10.1063/1.1735704)
Lamb, D and Scott, WD (1972) Linear growth rate of ice crystals grown from the vapor phase. J. Cryst. Growth, 12(1), 2131 (doi: 10.1016/0022–0248(72)90333–8)
Libbrecht, KG (2005) The physics of snow crystals. Rep. Progr. Phys.,68(4), 855895
Löwe, H, Egli, L, Bartlett, S, Guala, M and Manes, C (2007) On the evolution of the snow surface during snowfall. Geophys. Res. Lett., 34(21), L21507 (doi: 10.1029/2007GL031637)
Magono, C and Woo Lee, C (1966) Meteorological classification of natural snow crystals. J. Fac. Sci., Hokkaido Univ. Ser. 7, Geophysics, 2(4), 321335
Meier, M (2006) Produktion von naturidentischem Schnee. (Diplomarbeit, Eidgenössisches Institut für Schnee- und Lawinenforschung SLF/ETH Zürich)
Nakamura, H (1978) A new apparatus to produce fresh snow. Rep.Natl Res. Cent. Disaster Prev. 19, 229237 [in Japanese with English summary]
Nakaya, U (1954) Snow crystals: natural and artificial. Harvard University Press, Cambridge, MA
Nakaya, U, Satô, I and Sekido, Y (1938) Preliminary experiments on the artificial production of snow crystals. J. Fac. Sci., Hokkaido Univ., Ser. 2, 2(1), 111
Pruppacher, HR, Klett, JD and Wang, PK (1998) Microphysics of clouds and precipitation. Kluwer Academic, Dordrecht
Sato, N and Kikuchi, K (1985) Formation mechanisms of snow crystals at low temperature. Ann. Glaciol., 6, 232234
Satyawali, PK, Singh, AK, Dewali, SK, Kumar, P and Kumar, V (2008) Time dependence of snow microstructure and associated effective thermal conductivity. Ann. Glaciol., 49, 4350 (doi: 10.3189/172756408787814753)
Schleef, S and Löwe, H (2013) X-ray microtomography analysis of isothermal densification of new snow under external mechanical stress. J. Glaciol., 59(214), 233243 (doi: 10.3189/2013JoG12J076)
Sommerfield, RA and Freeman, TL (1988) Making artificial snow for laboratory use. USDA Forest Serv. Res. Note RM-486
Tanikawa, T, Aoki, T, Hori, M, Hachikubo, A, Abe, O and Aniya, M (2006) Monte Carlo simulations of spectral albedo for artificial snowpacks composed of spherical and nonspherical particles. Appl. Opt., 45(21), 53105319 (doi: 10.1364/AO.45.005310)
Vali, G (1996) Ice nucleation – a review. In Kulmala, M and Wagner, PE eds. Nucleation and atmospheric aerosols 1996, Elsevier Science, Oxford, 271279
Westbrook, CD, Ball, RC and Field, PR (2006) Radar scattering by aggregate snowflakes. Q. J. R. Meteorol. Soc., 132(616), 897914 (doi: 10.1256/qj.05.82)
World Meteorological Organization (WMO) (2008) Guide to meteorological instruments and methods of observation, 7th edn. (WMO-No 8) World Meteorological Organization, Geneva

Keywords

Metrics

Full text views

Total number of HTML views: 0
Total number of PDF views: 0 *
Loading metrics...

Abstract views

Total abstract views: 0 *
Loading metrics...

* Views captured on Cambridge Core between <date>. This data will be updated every 24 hours.

Usage data cannot currently be displayed