Hostname: page-component-848d4c4894-xm8r8 Total loading time: 0 Render date: 2024-06-22T16:16:43.606Z Has data issue: false hasContentIssue false
  • English
  • Français

Copilot Pro®: A full method for the steering of the machining

Published online by Cambridge University Press:  29 June 2011

É. Pairel ,
E. Goldschmidt ,
B. Vayre ,
P.-A. Adragna  and
M. Pillet
É. Pairel*
Affiliation:
Universitéde Savoie, Polytech Annecy-Chambéry, Symme lab., BP 80439, 74944 Annecy Cedex, France
E. Goldschmidt
Affiliation:
Centre Technique des industries du Décolletage (Ctdec), 750 avenue de Colomby, BP 65, 74301 Cluses, Cedex, France
B. Vayre
Affiliation:
Universitéde Savoie, Polytech Annecy-Chambéry, Symme lab., BP 80439, 74944 Annecy Cedex, France
P.-A. Adragna
Affiliation:
Université de Technologie de Troyes, LASMIS lab., 12 rue Marie Curie, 10010 Troyes, France
M. Pillet
Affiliation:
Universitéde Savoie, Polytech Annecy-Chambéry, Symme lab., BP 80439, 74944 Annecy Cedex, France
*
⋆ Correspondence: eric.pairel@univ-savoie.fr
Get access

Abstract

Copilot Pro® is a method for the initial and regular machine-tools setup, developed by the Symme laboratory of the Savoy University and by the Technical Center of Industries of Screw-machining (Ctdec) in France. Its first step is the organization of the different machining operations, in setup steps, themselves subdivided into measuring steps. The second step consists in determining the manufacturing dimensions to measure at the end of each measuring step. Finally, the third step consists in linking the manufacturing dimensions to both the correctors and the tool-dimensions, in the aim of calculating the corrections that have to be done in function of the deviations measured on the manufacturing dimensions. With this method, the steering of an industrial workpiece is performed with two steering parts instead of ten before.

Keywords

Setupmachiningtolerancingprocess planCopilot Pro®
Type
Research Article
Information
International Journal of Metrology and Quality Engineering , Volume 2 , Issue 1 , 2011 , pp. 39 - 44
Copyright
© EDP Sciences 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

E. Goldschmidt, Gammes et cotation pour le réglage des machines-outils de décolletage, Doctoral thesis, Université de Savoie, France, 2009
O.R. Wade, Tolerance Control in Design and Manufacturing (Industrial Press, New York, 1967)
O.R. Wade, Tolerance control, in: Tool and manufacturing engineering handbook, machining (Dearborn, MI, Society of Manufacturing Engineers, 2/1–2/60, 1983), Vol. 1
Bourdet, P., Chaînes de cotes de fabrication (méthode des Delta L) : Première partie, le modèle, L’Ingénieur et Technicien de l’Enseignement Technique 180, 23–32 (1967) Google Scholar
Bourdet, P., Chaînes de cotes de fabrication (méthode des Delta L) : Deuxième partie, le mode opératoire, L’Ingénieur et Technicien de l’Enseignement Technique 191, 15–23 (1975) Google Scholar
E. Pairel, E. Goldchmidt, P.-A. Adragna, P. Hernandez, M. Pillet, The pilot dimensions method: Reconciling Steering and Conformity in Workshops, International Journal of Production Research, iFirst, 1–14 (2010)
D. Duret, M. Pillet, A. Sergent, Cotation de fabrication paramétrée, Modélisation et pilotage d’une production, Proceedings of the 3ème Colloque International Conception et Production Intégrées (CPI’2003) Meknès, Maroc