Hostname: page-component-848d4c4894-jbqgn Total loading time: 0 Render date: 2024-06-26T08:41:27.535Z Has data issue: false hasContentIssue false

Removal of airborne bacteria by filtration using a composite microporous membrane made of a pyridinium-type polymer showing strong affinity with microbial cells

Published online by Cambridge University Press:  01 October 1998

N. KAWABATA
Affiliation:
Department of Chemistry and Materials Technology, Faculty of Engineering and Design, Kyoto Institute of Technology, Matsugasaki, Sakyo-ku, Kyoto 606, Japan
S. KAWATO
Affiliation:
Department of Chemistry and Materials Technology, Faculty of Engineering and Design, Kyoto Institute of Technology, Matsugasaki, Sakyo-ku, Kyoto 606, Japan
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the ‘Save PDF’ action button.

A composite microporous membrane made of poly(N-benzyl-4-vinylpyridinium chloride) that showed strong affinity with bacterial cells was prepared as a filter material for removing airborne bacteria. Thickness, pore diameter and porosity of the membrane were 0·72 mm, 14·5 μm and 63%, respectively. Electron micrographic analysis revealed that the membrane consisted of a very large number of connected beads of 1·4 μm in diameter made of the pyridinium-type polymer. Filtration using the membrane was performed easily at low flow rates with insignificant pressure drop across the membrane. Filtration at 63·7 cm/sec gave 99·98% and 99·996% removal (3·7 and 4·4 log10-unit reduction in concentration) of Escherichia coli and Pseudomonas aeruginosa, respectively. Staphylococcus aureus was not detected in filtrates. Since pores of the membrane were much larger than these bacteria, the efficient removal was best explained in terms of the affinity of the polymer with bacterial cells.

Type
Research Article
Copyright
© 1998 Cambridge University Press