Skip to main content Accessibility help
×
Home

Mechanical design and fabrication of a two-blade stripline for the Advanced Photon Source storage ring

  • L. H. Morrison (a1), C. Y. Yao (a1) and M. Givens (a1)

Abstract

The storage ring tune measurement system at the Advanced Photon Source (APS) consists of signal pickup and beam excitation drive striplines. Striplines currently installed in the APS storage ring are of a four-blade (inner conductor) design that serves as a beam diagnostic tool and for transverse and longitudinal tune measurements. A new two-blade stripline was designed for the transverse feedback system and to be used for horizontal beam excitation. In this paper, we discuss its mechanical design, assembly procedure, and construction.

Copyright

Corresponding author

Email address for correspondence:lhm@aps.anl.gov

References

Hide All
Van Valkenburg, M. E. 1995 Reference Data for Engineers: Radio, Electronics, Computer, and Communications, 8th edn, Prentice Hall Computer Publishing, ISBN 0-672-22753-3.
Winick, H. Synchrotoron Radiation Sources, A Primer, Series on Synchrotron Radiation Techniques and Applications, vol.1, World Scientific Publishing Co. Pte. Ltd., 1994.

Mechanical design and fabrication of a two-blade stripline for the Advanced Photon Source storage ring

  • L. H. Morrison (a1), C. Y. Yao (a1) and M. Givens (a1)

Metrics

Full text views

Total number of HTML views: 0
Total number of PDF views: 0 *
Loading metrics...

Abstract views

Total abstract views: 0 *
Loading metrics...

* Views captured on Cambridge Core between <date>. This data will be updated every 24 hours.

Usage data cannot currently be displayed