Skip to main content Accessibility help

A maintenance-focused approach to complex system design

  • Bo Yang Yu (a1), Tomonori Honda (a1), Syed M. Zubair (a2), Mostafa H. Sharqawy (a3) and Maria C. Yang (a1)...


Maintenance plays a critical role in reducing operating cost and maximizing reliability of a complex engineering system. This paper proposes a novel maintenance-focused, system-level design framework that attempts to capture the interactions between maintenance strategies and system-level design parameters overlooked in current modeling approaches. The goal of this maintenance-focused approach is to help designers better understand the interconnectedness of system architecture, choice of maintenance strategy, and uncertainties in a design. Application of the proposed design framework is demonstrated through a case example of a power plant condenser system. Results show that using an integrated approach can reveal the many nonobvious interactions between subsystems, and produce system designs that have lower life-cycle cost compared to traditional sequential design approaches.


Corresponding author

Reprint requests to: Maria C. Yang, Department of Mechanical Engineering, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Room 3-449B, Cambridge, MA, USA. E-mail:


Hide All
Agte, J., de Weck, O., Sobieszczanski-Sobieski, J., Arendsen, P., Alan Morris, A., & Spieck, M. (2010). MDO: assessment and direction for advancement—an opinion of one international group. Structural and Multidisciplinary Optimization 40(1–6), 1733.
Alfaris, A., Siddiqi, A., Charbel Rizk, C., & de Weck, O. (2010). Hierarchical decomposition and multidomain formulation for the design of complex sustainable systems. Journal of Mechanical Design 132(9), 091003.
Behdad, S., Kwak, M., Kim, H., & Thurston, D. (2010). Simultaneous selective disassembly and end-of-life decision making for multiple products that share disassembly operations. Journal of Mechanical Design 132(4), 041002.
Bodden, D.S., Hadden, W., Grube, B.E., & Clements, N.S. (2005). PHM as a design variable in air vehicle conceptual design. Proc. IEEE Aerospace Conf., pp. 33843394, Big Sky, MT, March 5–12.
Browning, T.R. (2001). Applying the design structure matrix to system decomposition and integration problems: a review and new directions. IEEE Transactions on Engineering 48(3), 292306.
Camci, F. (2009). System maintenance scheduling with prognostics information using genetic algorithm. IEEE Transactions on Reliability 58(3), 539552.
Caputo, A.C., Pelagagge, P.M., & Salini, P. (2011). Joint economic optimization of heat exchanger design and maintenance policy. Applied Thermal Engineering 31(8–9), 13811392.
Dekker, R. (1996). Applications of maintenance optimization models: a review and analysis. Reliability Engineering & System Safety 51(3), 229240.
Engel, S.J., Gilmartin, B.J., Bongort, K., & Hess, A. (2000). Prognostics, the real issues involved with predicting life remaining. Proc. 2000 IEEE Aerospace Conf., Vol. 6, pp. 457469, Big Sky, MT, March 18–25.
Eppinger, S.D., & Browning, T.R. (2012). Design Structure Matrix Methods and Applications. Cambridge, MA: MIT Press.
Eppinger, S.D., Joglekar, N.R., Olechowski, A., & Teo, T. (2014). Improving the systems engineering process with multilevel analysis of interactions. Artificial Intelligence for Engineering Design, Analysis and Manufacturing 28(4), 323337.
Epstein, N. (1983). Thinking about heat transfer fouling: a 5 × 5 matrix. Heat Transfer Engineering 4(1), 4356.
Ghosh, S., Devendorf, E., & Lewis, K. (2014). Exploring the effectiveness of parallel systems in distributed design processes subjected to stochastic disruptions. Artificial Intelligence for Engineering Design, Analysis and Manufacturing 28(4), 399412.
Giffin, M., de Weck, O., Bounova, G., Keller, R., Eckert, C., & Clarkson, P.J. (2009). Change propagation analysis in complex technical systems. Journal of Mechanical Design 131(8), 081001.
Grall, A., Berenguer, C., & Dieulle, L. (2002). A condition-based maintenance policy for stochastically deteriorating systems. Reliability Engineering & System Safety 76(2), 167180.
He, W., Williard, N., Osterman, M., & Pecht, M. (2011). Prognostics of lithium-ion batteries based on Dempster-Shafer theory and the Bayesian Monte Carlo method. Journal of Power Sources 196(23), 1031410321.
Holmgren, M. (2007). X Steam: Thermodynamic Properties of Water and Steam. Natick, MA: Mathworks.
Honda, T., & Antonsson, E.K. (2007). Coupling effects and sensitivity analysis for grayscale system reliability. Proc. ASME Int. Conf. Design Theory and Methodology, pp. 433446, La Vegas, NV, September 4–7.
Hu, J., & Cardin, M.A. (2015). Generating flexibility in the design of engineering systems to enable better sustainability and life cycle performance. Research in Engineering Design 26(2), 121143.
Jardine, A.K.S., Lin, D., & Banjevic, D. (2006). A review on machinery diagnostics and prognostics implementing condition-based maintenance. Mechanical Systems and Signal Processing 20(7), 14831510.
Kakac, S. (1991). Boilers, Evaporators, and Condensers. New York: Wiley.
Kothamasu, R., Huang, S., & VerDuin, W. (2006). System health monitoring and prognostics—a review of current paradigms and practices. International Journal of Advanced Manufacturing Technology 28(9), 10121024.
Kurtoglu, T., & Tumer, I.Y. (2008). A graph-based fault identification and propagation framework for functional design of complex systems. Journal of Mechanical Design 130(5), 051401.
Leão, B.P., João, PP Gomes, Roberto, KH Galvão, & Yoneyama, T. (2010). How to tell the good from the bad in failure prognostics methods. Proc. 2010 IEEE Aerospace Conf., pp. 17. Manhattan Beach, CA: IEEE.
Lin, J., de Weck, O., de Neufville, R., Robinson, B., & MacGowan, D. (2009). Designing capital-intensive systems with architectural and operational flexibility using a screening model. Complex Sciences, Vol. 5, pp. 19351946. Berlin: Springer.
Liu, H., Chen, W., Kokkolaras, M., Papalambros, P.Y., & Kim, H.M. (2006). Probabilistic analytical target cascading: a moment matching formulation for multilevel optimization under uncertainty. Journal of Mechanical Design (128), 991.
Lokiec, F., & Kronenberg, G. (2001). Emerging role of BOOT desalination projects. Desalination 136(1), 109114.
Loyola, B.R., Zhao, Y., Loh, K.J., & La Saponara, V. (2013). The electrical response of carbon nanotube-based thin film sensors subjected to mechanical and environmental effects. Smart Materials and Structures 22, 025010.
Lu, S., Schroeder, N.B., Kim, H.M., & Shanbhag, U.V. (2010). Hybrid power/energy generation through multidisciplinary and multilevel design optimization with complementarity constraints. Journal of Mechanical Design 132(10), 101007.
Maillart, L.M., & Pollock, S.M. (2002). Cost-optimal condition-monitoring for predictive maintenance of 2-phase systems. IEEE Transactions on Reliability 51(3), 322330.
Martins, J.R.R.A., & Lambe, A.B. (2013). Multidisciplinary design optimization: a survey of architectures. AIAA Journal 51(9), 20492075.
Mehrpouyan, H., Haley, B., Dong, A., Tumer, I.Y., & Hoyle, C. (2015). Resiliency analysis for complex engineered system design. Artificial Intelligence for Engineering Design, Analysis and Manufacturing 29(1), 93108.
Monga, A., & Zuo, M.J. (1998). Optimal system design considering maintenance and warranty. Computer and Operations Research 25(9), 691705.
Moullec, M.-L., Bouissou, M., Jankovic, M., Bocquet, J.C., Requillard, F., Maas, O., & Forgeot, O. (2013). Toward system architecture generation and performances assessment under uncertainty using Bayesian networks. Journal of Mechanical Design 135(4), 041002.
Mutha, C., Jensen, D., Tumer, I.Y., & Smidts, C. (2013). An integrated multidomain functional failure and propagation analysis approach for safe system design. Artificial Intelligence for Engineering Design, Analysis and Manufacturing 27(4), 317347.
Peng, T., He, J., Liu, Y., Saxena, A., Celaya, J.R., & Goebel, K. (2012). Integrated fatigue damage diagnosis and prognosis under uncertainties. Proc. Annual Conf. Prognostics and Health Management Society. Moffett Field, CA: Ames Research Center.
Rabas, T.J., Panchal, C.B., Sasscer, D.S., & Schaefer, R. (1993). Comparison of river-water fouling rates for spirally indented and plain tubes. Heat Transfer Engineering 14(4), 5873.
Sakhrani, V. (2012). Project architecture and life-cycle performance in large infrastructure projects. Proc. 3rd Int. Conf. Complex Systems Design & Management 2012. Berlin: Springer.
Santander, C.F., & Sanchez-Silva, M. (2008). Design and maintenance programme optimization for large infrastructure systems. Structure and Infrastructure Engineering 4(4), 297309.
Sheikh, A.K., Zubair, S.M., Younas, M., & Budair, M.O. (2001). Statistical aspects of fouling processes. Journal of Process Mechanical Engineering 215(4), 331354.
Stapelberg, R.F. (2009). Handbook of Reliability, Availability, Maintainability and Safety in Engineering Design. New York: Springer Science+Business Media.
Taborek, J., Aoki, T., Ritter, R.B., Palen, J.W., & Knudsen, J.G. (1972 a). Fouling: the major unresolved problem in heat transfer. Chemical Engineering Progress 68(2), 5967.
Taborek, J., Aoki, T., Ritter, R.B., Palen, J.W., & Knudsen, J.G. (1972 b). Predictive methods for fouling behavior. Chemical Engineering Progress 68(7), 6978.
Wang, G.G., & Shan, S. (2007). Review of metamodeling techniques in support of engineering design optimization. Journal of Mechanical Design 129(4), 370380.
Wang, P., & Vachtsevanos, G. (2001). Fault prognostics using dynamic wavelet neural networks. Artificial Intelligence for Engineering, Design Analysis and Manufacturing 15(4), 349365.
Wang, Z., & Wang, P. (2015). An integrated performance measure approach for system reliability analysis. Journal of Mechanical Design 137(2), 021406.
Wang, Z., Huang, H.Z., & Du, X. (2010). Optimal design accounting for reliability, maintenance, and warranty. Journal of Mechanical Design 132(1), 011007.
Xi, Z., Jing, R., Wang, P., & Hu, C. (2013). A copula-based sampling method for data-driven prognostics and health management. Proc. ASME Int. Conf. Design Theory and Methodology, Gaithersberg, MD, June 24–27.
Xing, Y., Ma, E.W.M., Tsui, K.L., & Pecht, M. (2011). Battery management systems in electric and hybrid vehicles. Energies 4(11), 18401857.
Xiong, F., Yin, X., Chen, W., & Yang, S. (2010). Enhanced probabilistic analytical target cascading with application to multi-scale design. Engineering Optimization 42(6), 581592.
Youn, B.D., Hu, C., & Wang, P. (2011). Resilience-driven system design of complex engineered systems. Journal of Mechanical Design 133(10), 101011.
Youn, B.D., & Wang, P. (2009). Complementary intersection method for system reliability analysis. Journal of Mechanical Design 131(4), 041004.
Yu, B.Y., Honda, T., Zak, G.M., Mitsos, A., Lienhard, J., Mistry, K., Zubair, S., Sharqawy, M.H., Antar, M., & Yang, M.C. (2012). Prognosis of component degradation under uncertainty: a method for early stage design of a complex engineering system. Proc. ASME 2012 11th Biennial Conf. Engineering Systems Design and Analysis, pp. 683694. American Society of Mechanical Engineers, Nantesin, France, July 2–4.
Zubair, S.M., Sheikh, A.K., Budair, M.O., & Badar, M.A. (1997). A maintenance strategy for heat transfer equipment subject to fouling: a probabilistic approach. Journal of Heat Transfer—Transactions of the ASME 119(3), 575580.



Full text views

Total number of HTML views: 0
Total number of PDF views: 0 *
Loading metrics...

Abstract views

Total abstract views: 0 *
Loading metrics...

* Views captured on Cambridge Core between <date>. This data will be updated every 24 hours.

Usage data cannot currently be displayed