Hostname: page-component-7479d7b7d-68ccn Total loading time: 0 Render date: 2024-07-11T17:05:17.735Z Has data issue: false hasContentIssue false
  • English
  • Français

Micro-foamed structural materials for micro-aircraft

Published online by Cambridge University Press:  04 July 2016

E. O'Keefe ,
M. Swan ,
R. Jones ,
V. Gergly  and
N. Cameron
E. O'Keefe
Affiliation:
QinetiQ, Farnborough, UK
M. Swan
Affiliation:
QinetiQ, Farnborough, UK
R. Jones
Affiliation:
QinetiQ, Farnborough, UK
V. Gergly
Affiliation:
DERA Cambridge Gordon Laboratory University of Cambridge, Cambridge, UK
N. Cameron
Affiliation:
University of Durham, Durham, UK
Get access Rights & Permissions [Opens in a new window]

Abstract

The development of micro-air vehicles poses a considerable challenge to the materials scientist. Vehicles that may occupy less than 10cm in any direction require many structural components with dimensions well below 1mm when conventional engineering and assembly techniques are employed. As with conventional unmanned air vehicles (UAVs), and full-scale aircraft, materials that display a huge breadth of characteristics are required to build the airframe and to engineer sub-components, while meeting stringent mass and volume budgets. In particular, high modulus, high toughness, easy formability and jointing are desirable qualities. For larger structures, conventional foamed materials can meet some of these properties. However, the pore sizes in these conventional materials are too large to allow manufacture of micro-scale components, airframe sections and skins. This paper describes the manufacture and properties of some micro-foamed polymers, and polymer composites, metals and oxide ceramics that are being developed at DERA specifically for micro-vehicle applications.

Type
Research Article
Information
The Aeronautical Journal , Volume 106 , Issue 1061 , July 2002 , pp. 385 - 392
Copyright
Copyright © Royal Aeronautical Society 2002 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Barby, D. and Haq, Z. Eur Pat, 1982,0,060,138.Google Scholar
2. Williams, J.M. and Wrobleski, D.A. Langmuir, 1988, 4, 656–62. Williams, J.M., Gray, A.J. and Wilkerson, M.H. ibid, 1990, 6, 437 Gregory, D., Sharples, M. and Tucker, I.M. Eur Pat, 1989, 299,762: Barbetta, A. and Cameron, N.R. Chem Commun, 2000,221.Google Scholar
3. Hainey, P., Huxham, I.M., Rowatt, B., Sherrington, D.C. and Tetley, L. Macromolecules, 1991, 24, 117; Cameron, N.R., and Barbetta, A. J Mater Chem, 2000,10,2466-72.Google Scholar
4. Cameron, N.R. and Sherrington, D.C. J Mater Chem, 1997, 7, 2209.Google Scholar
5. Gibson, L.J. Mechanical behaviour of metallic foams, Ann Rev Mater Sci, 2000,30, pp 191–227.Google Scholar
6. Gergely, V., Degischer, HP. and Clyne, T.W. Chapter 3.30: Recycling of MMCs and production of metallic foams, in comprehensive composite materials, 3, Metal Matrix Composites, Clyne, T.W., (Ed), 2000, Elsevier: Amsterdam, pp 797–820.Google Scholar
7. Gergely, V. and Clyne, T.W. The FORMGRIP process: foaming of reinforced metals by gas release in precursors, Adv Engng Mater, 2000,2, pp 175–178.Google Scholar
8. Miyoshi, T. et al. Aluminium foam, “Alporas“: the production process, properties and applications, in Porous and Cellular Materials for Structural Applications, San Francisco, California: MRS, 1998.Google Scholar
9. Wood, J.T. Production and applications of continuously cast, foamed aluminium, in Metal Foams, Stanton, Delaware: MIT-Verlag Publishing, Bremen, 1997.Google Scholar
10. Baumeister, J., Banhart, J. and M. Weber, , M. Metallischer Verbundwerkstoff und Verfahren zu seiner Herstellung, in German Patent DE 4,426,627,1997.Google Scholar
11. Simancik, F. and Schorghuber, F. Complex-shaped foamed aluminium parts as permanent cores in aluminium castings, in Porous and Cellular Materials for Structural Applications, San Francisco: MRS, 1998.Google Scholar
12. Hartmann, M., Reindel, K. and Singer, R.F. Fabrication and properties of syntactic magnesium foams, in Porous and Cellular Materials for Structural Applications, San Francisco: MRS, 1998.Google Scholar
13. Rawal, S.P., Lanning, B.R. and Misra, M.S. Design and mechanical properties of microballoon-aluminum composite-core laminates, 9th International Conference on Composite Materials, (ICCM-9), Madrid: Woodhead, Cambridge, 1993.Google Scholar
14. Kiser, M., He, M.Y. and Zok, F.W., The mechanical response of ceramic microballon reinforced aluminum matrix composites under compressive loading, Acta Mat, 1999,47, (9), pp 2685–2694.Google Scholar
15. Brinker, CJ. and Scherer, G.W. Sol-Gel Science, The Physics and Chemistry of Sol-Gel Processing, Academic Press, New York, 1990.Google Scholar
16. Sharp, K.G. and Michalczyk, M.J. J Sol-gel Sci Tech, 1997, 8, pp 541–546.Google Scholar
17. Tilston, J.R. and Cheung, W.S. Paper 32, Fifteenth International Conference, Unmanned Air Vehicle Systems, Bristol, UK, April 2000.Google Scholar