Hostname: page-component-8448b6f56d-wq2xx Total loading time: 0 Render date: 2024-04-23T15:40:08.701Z Has data issue: false hasContentIssue false
  • English
  • Français

Creep-Stress Analysis of Thin-Walled Structures*

Published online by Cambridge University Press:  04 July 2016

S. A. Patel ,
K. A. V. Pandalai  and
B. Venkatraman
S. A. Patel
Affiliation:
Department of Aerospace Engineering and Applied Mechanics, Polytechnic Institute of Brooklyn, New York
K. A. V. Pandalai
Affiliation:
Department of Aerospace Engineering and Applied Mechanics, Polytechnic Institute of Brooklyn, New York. Now with the India Institute of Technology, Bombay
B. Venkatraman
Affiliation:
Department of Aerospace Engineering and Applied Mechanics, Polytechnic Institute of Brooklyn, New York
Get access Rights & Permissions [Opens in a new window]

Extract

In the present era of supersonic and hypersonic flight, structural analysts are well aware of the new problems that arise from the exposure of aircraft and missile structures to elevated temperatures. The task of solving these problems is in its early stage of development. Since the problems are diversified in nature, a different method of solution has to be developed in each case. It is probable that in some cases radically new techniques may have to be devised. Until such time, the structural designer is forced to take a realistic view and use satisfactory extensions of existing methods of analysis.

Type
Research Article
Information
The Aeronautical Journal , Volume 64 , Issue 599 , November 1960 , pp. 673 - 682
Copyright
Copyright © Royal Aeronautical Society 1960

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Footnotes

*

The results presented in this paper were obtained in the course of research under Contract No. AF 49(638)-302, sponsored at the Polytechnic Institute of Brooklyn by the Air Force Office of Scientific Research, Air Research and Development Command, of the U.S. Air Force. These appeared periodically as Polytechnic Institute of Brooklyn Aeronautical Laboratory Reports. The authors are grateful for permission to publish the results.

References

1.Prager, W. (1945). Strain Hardening Under Combined Stresses. Journal of Applied Physics, Vol. 16, No. 21, p. 837, December 1945.Google Scholar
2.Hoff, N. J. (1956). Effets Thermiques dan le Calcul de la Resistance Des Structures D'Avions et D'engines. AGARD Report No. 52, January 1956.Google Scholar
3. ANC-5 (1951). Strength of Metal Aircraft Elements. ANC-5, Munitions Board Aircraft Committee, Department of Defence, Revised Edition, June 1951.Google Scholar
4.Mathauser, E. E. and JrBrooks, W. A. (1954). An Investigation of the Creep Lifetime of 75S-T6 Aluminum Alloy Columns, N.A.C.A. T.N. 3204, July 1954.Google Scholar
5.Hoff, N. J. (1955). Stress Distribution in the Presence of Steady Creep. Proceedings of the Conference on High Speed Aeronautics. Polytechnic Institute of Brooklyn, p. 271, January 1955.Google Scholar
6.JrHodge, P. G., and Venkatraman, B. Approximate Solutions of Some Problems in Steady Creep. Symposium Su La Plasticitá Nella Scienza Delle Costruzioni. In Onore del Prof. Arturo Danusso. Varenna, September 1956.Google Scholar
7.Patel, S. A., Venkatraman, B. and JrHodge, P. G. (1958). Torsion of Cylindrical and Prismatic Bars in the Presence of Steady Creep. Journal of Applied Mechanics, Vol. 25, No. 2, p. 214, June 1958.Google Scholar
8.Pandalai, K. A. V. and Patel, S. A. (1958). Stress Distribution in Multi-Cellular Torque Boxes Due to Primary and Secondary Creep. PIBAL Report No. 480, December 1958.Google Scholar
9.Patel, S. A. and Pandalai, K. A. V. (1959). Stress Distribution in Beams of Thin-Walled Sections in the Presence of Creep. PIBAL Report No. 486, February 1959.Google Scholar
10.Pandalai, K. A. V. and Patel, S. A. (1959). A Note on Shear Centres of Thin-Walled Closed Sections in the Presence of Creep. PIBAL Report No. 487, February 1959.Google Scholar
11.Patel, S. A., Pandalai, K. A. V. and Venkatraman, B. (1959). Creep-Stress Analysis of Thin-Walled Structures. PIBAL Report No. 497, July 1959.Google Scholar