Hostname: page-component-7bb8b95d7b-lvwk9 Total loading time: 0 Render date: 2024-09-22T09:02:20.623Z Has data issue: false hasContentIssue false
  • English
  • Français

Crystallite Orientation Analysis from Incomplete Pole Figures

Published online by Cambridge University Press:  06 March 2019

Peter R. Morris
Peter R. Morris*
Affiliation:
Research and Technology, Armco Steel Corporation, Middletown, Ohio 45042
Get access

Abstract

The use of incomplete pole figures results in the loss of orthogonality relations among the associated Legendre functions, and necessitates explicitly evaluating integrals of products of these functions. The required indefinite integrals of associated Legendre functions and their products have been evaluated for cubic crystallographic symmetry and orthotropic physical symmetry through sixteenth order.

The solution has been particularized for {200}, {222}, and {110} back-reflection pole figures, where data are confined to the region not exceeding 60 degrees from the sheet normal direction.

Data obtained from a sample of low—manganese steel sheet are used to illustrate the method, and results are compared to those obtained using complete pole figures obtained with a composite sample of the same material.

The method described makes it possible to study crystallite orientation distribution as a function of distance from the sheet surface, by a series of pole figure measurements on the surface after successive material removals by polishing and etching.

Type
Research Article
Information
Advances in X-Ray Analysis , Volume 18: Twenty-Third Annual Conference on Applications of X-ray Analysis, August 7-9, 1974 , 1974 , pp. 514 - 534
Copyright
Copyright © International Centre for Diffraction Data 1974

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Bunge, Hans-Joachim “Zur Darstellung Allgemeiner Texturen”, Z. Metallkde, 56: 872-4, 1965.Google Scholar
2. Roe, Ryong-Joon, “Description of Crystallite Orientation in Polycrystalline Materials. III. General Solution to Pole Figure Inversion,” J. Appl. Phys., 56; 2024-31, 1965.Google Scholar
3. Wigner, Eugene P., “Group Theory and Its Application to the Quantum Mechanics of Atomic Spectra”, English translation by J. J. Griffin, Academic Press, New York, 1959, pp. 157-70.Google Scholar
4. Lopata, Stanley L. and Kula, Eric B., “A Reflection Method for Pole—Figure Determination”, Trans, AIME, 224: 865-6, 1962.Google Scholar
5. Bunge, Hans-Joachim, “Mathernatische Methoden der Texturanalyse”, Akademie—Verlag, Berlin, 1969, pp. 56-9.Google Scholar
6. Roe, Ryong-Joon, “Inversion of Pole Figures for Materials Having Cubic Crystal Symmetry”, J. Appl. Phys., 37: 2069–72, 1966.Google Scholar