Skip to main content Accessibility help
×
Hostname: page-component-7c8c6479df-r7xzm Total loading time: 0 Render date: 2024-03-19T14:01:58.795Z Has data issue: false hasContentIssue false

3 - Shape Memory Alloys (SMAs)

Published online by Cambridge University Press:  18 December 2013

Inderjit Chopra
Affiliation:
University of Maryland, College Park
Jayant Sirohi
Affiliation:
University of Texas, Austin
Get access

Summary

Certain classes of metallic alloys have a special ability to “memorize” their shape at a low temperature and recover large deformations imparted at a low temperature on thermal activation. These alloys are called shape memory alloys (SMAs). The recovery of strains imparted to the material at a lower temperature, as a result of heating, is called the shape memory effect (SME). The SME was first discovered by Chang and Read in 1951 in the Au-Cd (gold-cadmium) alloy system. However, the effect became more well known after the discovery of nickel-titanium alloys.

Buehler and Wiley [1, 2] discovered a nickel-titanium alloy in 1961 called NiTiNOL (i.e., Nickel Titanium alloy developed at the Naval Ordinance Lab) that exhibited a much greater SME than previous materials. This material was a binary alloy of nickel and titanium in a ratio of 55% to 45%, respectively. A 100% recovery of strain up to a maximum of about 8% pre-strain was achieved in this alloy. Another interesting feature noticed was a more than 200% increase in Young's modulus in the high-temperature phase compared to the low-temperature phase. Subsequently, it was determined that the percentage of nickel and titanium influences the material properties of Nitinol and can be varied to control the transformation temperatures in the material [3]. Also, the addition of a third or fourth element (most commonly copper) to NiTi can be used to selectively control some properties of SMA wires.

Type
Chapter
Information
Publisher: Cambridge University Press
Print publication year: 2013

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] W. J., Buehler, J. V., Gilfrich, and R. C., Wiley. Effect of low-temperature phase changes on the mechanical properties of alloys near composition TiNi. Journal of Applied Physics, 34(5):1475–1477, May 1963.Google Scholar
[2] W. J., Buehler, R. C., Wiley, and F. E., Wang. Nickel-based alloys. U.S. Patent No. 3,174,851, March 1965.Google Scholar
[3] C. M., Wayman and T. W., Duerig. An introduction to martensite and shape memory. In Engineering Aspects of Shape Memory Alloys,edited by T. W., Duerig. Butterworth-Heinemann, 1990.Google Scholar
[4] K. N., Melton and O., Mercier. Deformation behaviour of NiTi-based alloys. Metallurgical and Materials Transactions A 9(10):1487–1488,1978.Google Scholar
[5] H., Tas, L., Delaey, and A., Deruyttere. Stress-induced transformations and the shape-memory effect. Journal of Less-Common Metals, 28:141, 1972.Google Scholar
[6] L., Delaey, R. V., Krishnan, H., Tas, and H., Warlimont. Thermoelasticity, pseudoelastic-ity and the memory effects associated with martensitic transformations -1, 2,3. Journal of Materials Science, 9(9):1521–1555, September 1974.Google Scholar
[7] L., Delaey and J., Thienel. Microstructural Changes During SME Behavior. In Shape memory effects in alloys, edited by J., Perkins, pages 341–350. Proceedings of the International Symposium on Shape Memory Effects and Applications, Toronto. Plenum Press, New York, 1975.Google Scholar
[8] J., Perkins and D., Hodgson. The two-way shape memory effect. In Engineering Aspects of Shape Memory Alloys, edited by T. W., Durig, K. N., Melton, D., Stockel, and C. M., Wayman, pp. 195–206, Butterworth-Heinemann, 1990.Google Scholar
[9] A., Nagasawa, K., Enami, Y., Ishino, Y., Abe, and S., Nenno. Reversible shape memory effect. Scripta Metallurgica, 8(8):1055–1060, September 1974.Google Scholar
[10] R. J., Wasilewski. Effects of applied stress on the martensitic transformation in TiNi. Metallurgical and Materials Transactions B, 2(11):2973–2981, November 1971.Google Scholar
[11] C. M., Wayman and H. K. D. H., Bhadeshia. Phase transformations, nondiffusive. In Physical Metallurgy, edited by R. W., Cahn and P., Haasen, pp. 1507–1553, Elsevier, 1983.Google Scholar
[12] B. J., de Blonk and D. C., Lagoudas. Actuation of elastomeric rods with embedded two-way shape memory alloy actuators. Smart Materials and Structures, 7(6):771–783, 1998.Google Scholar
[13] E., Patoor, P., Barbe, A., Eberhardt, and M., Berveiller. Internal stress effect in the shape memory behavior. European symposium on martensitic transformation and shape memory properties, J. Physique Coll. IV, 1(C4):95–100, 1991.Google Scholar
[14] K., Escher and E., Hornbogen. Aspects of two-way shape memory in NiTi-silicone composite materials. European symposium on martensitic transformation and shape memory properties, J. Physique IV, 1(C4):427–432, 1991.Google Scholar
[15] K., Escher and E., Hornbogen. Robot grippers – An application of two-way shape memory. In Progress in Shape Memory, edited by S., Eucken, pages 301–316. DGM-Informationsgesellschaft, 1991.Google Scholar
[16] R., Stalmans, J. V., Humbeeck, and L., Delaey. Training and the two way memory effect in copper based shape memory alloys. European symposium on martensitic transformation and shape memory properties, J. Physique Coll. IV, 1(C4):403–408, 1991.Google Scholar
[17] D. A., Hebda and S. R., White. Effect of training conditions and extended thermal cycling on nitinol two-way shape memory behavior. Smart Materials and Structures,4(4):298–304, 1995.Google Scholar
[18] B. G., Mellor, J. M., Guilemany, and J., Fernandez. Two way shape memory effect obtained by stabilised stress induced martensite in Cu-Al-Co and Cu-Al-Mn alloys. European symposium on martensitic transformation and shape memory properties, J. Physique Coll. IV, 1(C4):457–462, 1991.Google Scholar
[19] L., Sun and K-H, Wu. The two-way effect in NiTi-Pd high temperature shape memory alloys. Proceedings of SPIE Smart Structures and Materials Symposium, 2189:298–305, 1994.
[20] M., Tokuda, S., Sugino, and T., Inaba. Two-way shape memory behavior obtained by combined loading training. Journal of Intelligent Materials Systems and Structures, 12(4): 289–294, April 2001.Google Scholar
[21] X., Meng, F., Chen, W., Cai, L., Wang, and L., Zhao. Two-way shape memory effect and its stability in a Ti-Ni-Nb wide hysteresis shape memory alloy. Materials Transactions, 47(3):724–727, 2006.Google Scholar
[22] J. V., Humbeeck, R., Stalmans, M., Chandrasekaran, and L., Delaey. On the stability of shape memory alloys. In T. W., DuerigEngineering Aspects of Shape Memory Alloys, pages 96–105, Butterworth-Heinemann, 1990.Google Scholar
[23] H., Scherngell and A. C., Kneissl. Training and stability of the intrinsic two-way shape memory effect in Ni-Ti alloys. Scripta Materialia, 39(2):205–212,1998.Google Scholar
[24] V., Kafka. An overview of applications of mesomechanical approach to shape memory phenomena – Completed by a new application to two-way shape memory. Journal of Intelligent Materials and Smart Structures, 19:3–17, January 2008.Google Scholar
[25] T., Takagi, Y., Luo, S., Suzuki, M., Matsumoto, and J., Tani. Modeling and numerical simulation on thermomechanical behavior of SMA plates with two-way shape memory effect. Journal of Intelligent Material Systems and Structures, 12(11):721–728, November 2001.Google Scholar
[26] M., Nishida and T., Honma. All-round shape memory effect in Ni-rich TiNi alloys generated by constrained aging. Scripta Metallurgica, 18(11):1293–1298, 1984.Google Scholar
[27] M., Nishida and T., Honma. Effect of heat treatment on the all-round shape memory effect in Ti-51 at % Ni. Scripta Metallurgica, 18(11):1299–1302,1984.Google Scholar
[28] Y., Luo, T., Okuyama, T., Takagi, T., Kamiyama, K., Nishi, and T., Yambe. Thermal control of shape memory alloy artificial anal sphincters for complete implantation. Smart Materials and Structures, 14(1):29–35, 2005.Google Scholar
[29] S., Miyazaki and K., Otsuka. Deformation and transition behavior associated with the R-phase in Ti-Ni alloys. Metallurgical Transactions A (Physical Metallurgy and Materials Science), 17A(1):53–63, January 1986.Google Scholar
[30] V. N., Khachin, Y. I., Paskal, V. E., Gunter, A. A., Monasevich, and V. P., Sivokha. Structural transformation, physical properties and memory effects in the nickel-titanium and titanium-based alloys. Physics of Metals and Metallography, 46(3):49–57,1978.Google Scholar
[31] S., Miyazaki, S., Kimura, and K., Otsuka. Shape-memory effect and pseudoelasticity associated with the R-phase transition in Ti-50.5 at% Ni single crystals. Philosophical Magazine A: Physics of Condensed Matter, Defects and Mechanical Properties, 57(3): 467–478, March 1988.Google Scholar
[32] H., Naito, Y., Matsuzaki, and T., Ikeda. A unified model of thermomechanical behavior of shape memory alloys. Proceedings of the SPIE Smart Structures and Materials Symposium, 4333:291–300, 2001.
[33] P., Sittner, R., Stalmans, and M., Tokuda. An algorithm for prediction of the hysteresis responses of shape memory alloys. Smart Materials and Structures, 9(4):452–465, 2000.Google Scholar
[34] D. C., Lagoudas and E. L., Vandygriff. Processing and characterization of NiTi porous SMA by elevated pressure sintering. Journal of Intelligent Material Systems and Structures, 13(12):837–850, 2002.Google Scholar
[35] K., Tanaka. A thermomechanical sketch of shape memory effect: One-dimensional tensile behavior. Res. Mechanica, 18:251–263, 1986.
[36] C., Liang and C. A., Rogers. One-dimensional thermomechanical constitutive relations for shape memory materials. Journal of Intelligent Material Systems and Structures, 8(4):285–302, 1997.Google Scholar
[37] L. C., Brinson. One-dimensional constitutive behavior of shape memory alloys: Thermomechanical derivation with non-constant material functions and redefined martensite internal variable. Journal of Intelligent Material Systems and Structures, 4(2):229–242, 1993.Google Scholar
[38] Y., Ivshin and T. J., Pence. Thermomechanical model for a one variant shape memory material. Journal of Intelligent Material Systems and Structures, 5(4):455–173, 1994.Google Scholar
[39] H., Tobushi, S., Yamada, T., Hachisuka, A., Ikai, and K., Tanaka. Thermomechani-cal properties due to martensitic and R-phase transformations of TiNi shape memory alloy subjected to cyclic loadings. Smart Materials and Structures, 5(6):788–795, 1996.Google Scholar
[40] K., Otsuka. Introduction to the R-Phase Transition. In T. W., Duerig, Engineering Aspects of Shape Memory Alloys, Butterworth-Heinemann Ltd., 1990.Google Scholar
[41] L., Brinson and M., Panico. Comments to the paper “Differential and integrated form consistency in 1-D phenomenological models for shape memory alloy constitutive behavior” by V. R., Buravalla and A., Khandelwal. International Journal of Solids and Structures, 46:217–220, 2009.
[42] J.-H., Chung, J.-S., Heo, and J.-J., Lee. Implementation strategy for the dual transformation region in the Brinson SMA constitutive model. Smart Materials and Structures, 16(1):N1–N5, February 2007.Google Scholar
[43] A., Khandelwal and V. R., Buravalla. A correction to the Brinson's evolution kinetics for shape memory alloys. Journal of Intelligent Material Systems and Structures, 19(1): 43–46, 2008.Google Scholar
[44] M., Panico and L. C., Brinson. A three-dimensional phenomenological model for marten-site reorientation in shape memory alloys. Journal of the Mechanics and Physics of Solids, 55:2491–2511, 2009.
[45] J. G., Boyd and D. C., Lagoudas. A thermodynamic constitutive model for the shape memory materials, part I: The monolithic shape memory alloys. International Journal of Plasticity, 12(6):805–842, 1998.Google Scholar
[46] L. C., Brinson and M. S., Huang. Simplifications and comparisons of shape memory alloy constitutive models. Journal of Intelligent Material Systems and Structures, 7(1): 108–114, 1996.Google Scholar
[47] Y., Matsuzaki and H., Naito. Macroscopic and microscopic constitutive models of shape memory alloys based on phase interaction energy function: A review. Journal of Intel-ligent Material Systems and Structures, 15(2):141–155, 2004.Google Scholar
[48] H., Naito, Y., Matsuzaki, and T., Ikeda. A unified constitutive model of phase transformations and rearrangements of shape memory alloy wires subjected to quasi-static load. Smart Materials and Structures, 13(3):535–543, 2004.Google Scholar
[49] E. J., Graesser and F. A., Cozzarelli. A proposed three-dimensional constitutive model for shape memory alloys. Journal of Intelligent Materials Systems and Structures, 5(1): 78–89, 1994.Google Scholar
[50] B., Malovrh and F., Gandhi. Mechanism-based phenomenological models for the pseu-doelastic hysteresis behavior of shape memory alloys. Journal of Intelligent Material Systems and Structures, 12(1):21–30, 2001.Google Scholar
[51] B., Schroeder, C., Boller, J., Kramer, and B., Kroplin. Comparative assessment of models for describing the constitutive behavior of shape memory alloys. In Proceedings, 4th ESSM and MIMR Conference on Shape Memory Alloys, Harrogate, pages 305–312, 1998.Google Scholar
[52] F., Falk. Free Boundary Problems – Theory and Applications, vols. VI-VII. Longman, 1990.Google Scholar
[53] B. J., Hurlbut and M. E., Regelbrugge. Comparison and calibration of models of shape-memory alloy behavior. Seventh International Conference on Adaptive Structures: September 23-25, 1996, Rome, Italy. CRC Press, 1997.Google Scholar
[54] Z., Bo and D. C., Lagoudas. Comparison of different thermomechanical models for shape memory alloys. In Adaptive Structures and Composite Materials: Analysis and Application: ASME Symposium, volume 54, pages 9–19, 1994.Google Scholar
[55] Technical Characteristics of FlexinolTM Actuator Wires, Dynalloy, Inc., 2002, http://www.dynalloy.com.
[56] J., Salichs, Z., Hou, and M., Noori. Vibration suppression of structures using passive shape memory alloy energy dissipation devices. Journal of Intelligent Material Systems and Structures, 12(10):671–680, 2001.Google Scholar
[57] M. G., Faulkner, J. J., Amalraj, and A., Bhattacharyya. Experimental determination of thermal and electrical properties of Ni-Ti shape memory wires. Smart Materials and Structures, 9(5):632–639, October 2000.Google Scholar
[58] E., Abel, H., Luo, M., Pridham, and A., Slade. Issues concerning the measurement of transformation temperatures of NiTi alloys. Smart Materials and Structures, 13(5): 1110–1117, October 2004.Google Scholar
[59] J. A., Shaw and S., Kyriakides. Thermomechanical aspects of NiTi. Journal of the Mechanics and Physics of Solids, 43(8):1243–1281, 1995.Google Scholar
[60] A., Baz, S., Poh, J., Ro, and J., Gilheany. Control of the natural frequencies of Nitinol-reinforced composite beams. Journal of Sound and Vibration, 185(1):171–185, 1995.Google Scholar
[61] H., Tobushi, T., Nakahara, Y., Shimeno, and T., Hashimoto. Low-cycle fatigue of TiNi shape memory alloy and formulation of fatigue life. Journal of Engineering Materials and Technology, 122:186–191, 2000.
[62] S., Mikuriya, T., Nakahara, H., Tobushi, and H., Watanabe. The estimation of temperature rise in low-cycle fatigue of TiNi shape-memory alloy. JSME International Journal, Series A, 43(2):166–172, 2000.Google Scholar
[63] J., Epps and I., Chopra. Shape memory alloy actuators for in-flight tracking of helicopter rotor blades. Smart Materials and Structures, 10(1):104–111, 2001.Google Scholar
[64] R., Lammering and I., Schmidt. Experimental investigations on the damping capacity of niti components. Smart Materials and Structures, 10(5):853–859, 2001.Google Scholar
[65] Y., Liu and J. V., Humbeeck. On the damping behaviour of NiTi shape memory alloy. Journal de Physique IV, 7(5):519–524, November 1997.Google Scholar
[66] O., Pushtshaenko, E. R., Oberaigner, T., Antretter, F. D., Fischer, and K., Tanaka. Simulation of the damping of a shape memory alloy rod by using the Likhachev model. Journal of Intelligent Material Systems and Structures, 13(12):817–823, 2002.Google Scholar
[67] V. A., Likhachev. Structure-analytical theory of martensitic unelasticity. Journal de physique IV, 5:137–142, 1995.
[68] F., Gandhi and D., Wolons. Characterization of the pseudoelastic damping behavior of shape memory alloy wires using complex modulus. Smart Materials and Structures, 8(1):49–56, 1999.Google Scholar
[69] D., Wolons, F., Gandhi, and B., Malovrh. Experimental investigation of the pseudoelastic hysteresis damping characteristics of shape memory alloy wires. Journal of Intelligent Material Systems and Structures, 9(2):116–126, 1998.Google Scholar
[70] T., Hesse, M., Ghorashi, and D., Inman. Shape memory alloy in tension and compression and its application as clamping-force actuator in a bolted joint, Part 1: Experimentation. Journal of Intelligent Material Systems and Structures, 15(8):577–587, August 2004.Google Scholar
[71] M., Ghorashi and D., Inman. Shape memory alloy in tension and compression and its application as clamping-force actuator in a bolted joint, Part 2: Modeling. Journal of Intelligent Material Systems and Structures, 15(8):589–600, August 2004.Google Scholar
[72] F., Auricchio and E., Sacco. Temperature-dependent beam for shape memory alloys: Constitutive modeling, finite-element implementation and numerical simulations. Computer Methods in Applied Mechanics and Engineering, 174:171–190, 1999.
[73] K., Gall, H., Sehitoglu, Y. I., Chumlyakov, and I. V., Kireeva. Tension-compression asymmetry of the stress-strain response in aged single crystal and polycrystalline NiTi. Acta Materialia, 47(4):1203–1217, 1999.Google Scholar
[74] Y., Liu, Z., Xie, J. V., Humbeeck, and L., Delaey. Asymmetry of stress-strain curves under tension and compression for NiTi shape memory alloys. Acta Materialia, 46(12): 4325–4338, 1998.Google Scholar
[75] K. N., Melton. Ni-Ti based shape memory alloys. In T. W., Duerig, Engineering Aspects of Shape Memory Alloys. Butterworth-Heinemann, 1990.Google Scholar
[76] R., Plietsch and K., Ehrlich. Strength differential effect in pseudoelastic NiTi shape memory alloys. Acta Materialia, 45(6):2417–2424, June 1997.Google Scholar
[77] J. A., Shaw and S., Kyriakides. Initiation and propagation of localized deformation in elasto-plastic strips under uniaxial tension. International Journal of Plasticity, 13(10): 837–871, 1997.Google Scholar
[78] H., Prahlad and I., Chopra. Experimental characteristics of Ni-Ti shape memory alloys under uniaxial loading conditions. Journal of Intelligent Material Systems and Structures, 11(4):272–282, 2000.Google Scholar
[79] K., Wu, F., Yang, Z., Pu, and J., Shi. The effect of strain rate on the detwinning and superelastic behavior of NiTi shape memory alloys. Journal of Intelligent Material Systems and Structures, 7(2):138–144, 1996.Google Scholar
[80] L. G., Chang. On diffusionless transformation in Au-Cd single crystals containing 47.5 atomic percent cadmium: Characteristics of single-interface transformation. Journal of Applied Physics, 23(7):725–728, 1952.Google Scholar
[81] M. W., Burkart and T. A., Read. Diffusionless phase change in the indiium-thallium system. In Transactions of the AIME, volume 197, pages 1516–1524, 1953.Google Scholar
[82] K., Bhattacharya, R. D., James, and P. J., Swart. Relaxation in shape memory alloys, Part I: Mechanical model; Part II: Thermomechanical model and proposed experiments. Acta Materialia, 45(11):4547–4568, 1997.Google Scholar
[83] J., Hodowany, G., Ravichandran, A. J., Rosakis, and P., Rosakis. Partition of plastic work into heat and stored energy in metals. Experimental Mechanics, 40(2):113–123, 2000.Google Scholar
[84] R., Abeyaratne and S., Kim. Cyclic effects in shape-memory alloys: A one-dimensional continuum model. International Journal of Solids and Structures, 34(25):3273–3289, 1997.Google Scholar
[85] A., Bekker, L. C., Brinson, and K., Issen. Localized and diffuse thermo-induced phase transformation in 1-D shape memory alloys. Journal of Intelligent Material Systems and Structures, 9(5):355–365, 1998.Google Scholar
[86] T. J., Lim and D. L., McDowell. Mechanical behavior of a Ni-Ti shape memory alloy under axial-torsional proportional and nonproportional loading. Journal of Engineering Materials and Technology, Transactions of the ASME, 121(1):9–18, 1998.Google Scholar
[87] P. H., Lin, H., Tobushi, K., Tanaka, T., Hattori, and M., Makita. Pseudoelastic behavior of NiTi shape memory alloy subjected to strain variations. Journal of Intelligent Material Systems and Structures, 5(5):694–701, 1994.Google Scholar
[88] A., Bhattacharyya and G.J., Weng, An energy criterion for the stress-induced martensitic transformation in a ductile system. Journal of Mechanics and Physics of Solids, 42(11): 1699–1724, 1994.Google Scholar
[89] F. P., Incroperra and D. P., DeWitt. Fundamentals of Heat and Mass Transfer, 3rd ed. John Wiley and Sons, 1990.Google Scholar
[90] S. W., Churchill and H. H. S., Chu. Correlating equations for laminar and turbulent free convection from a horizontal cylinder. International Journal of Heat and Mass Transfer, 18:1049, 1975.Google Scholar
[91] A., Bhattacharyya, L., Sweeney, and M. G., Faulkner. Experimental characterization of free convection during thermal phase transformations in shape memory alloy wires. Smart Materials and Structures, 11(3):411–422, 2002.Google Scholar
[92] Technical Characteristics of SMA Wires, Shape Memory Applications, http://www.sma-inc.com/NiTiProperties.html.Inc., 2002.
[93] A., Vitiello, G., Giorleo, and R. E., Morace. Analysis of thermomechanical behaviour of Nitinol wires with high strain rates. Smart Materials and Structures, 14(1):215–221, February 2005.Google Scholar
[94] P. H., Leo, T. W., Shield, and O. P., Bruno. Transient heat-transfer effects on the pseudo-elastic behavior of shape-memory wires. Acta Metallurgica et Materialia, 41(8):2477–2485, August 1993.Google Scholar
[95] S., Miyazaki, T., Imai, Y., Igo, and K., Otsuka. Effect of cyclic deformation on the pseudoelasticity characteristics of Ti-Ni alloys. Metallurgical and Materials Transactions A, 17(1):115–120, January 1986.Google Scholar
[96] J., Perkins and R. O., Sponholz. Stress-induced martensitic transformation cycling and two-way shape memory training in Cu-Zn-Al alloys. Metallurgical and Materials Transactions A, 15(2):313–321, February 1984.Google Scholar
[97] T. J., Lim and D. L., McDowell. Path dependence of shape memory alloys during cyclic loading. Journal of Intelligent Material Systems and Structures, 6(6):817–830, 1995.Google Scholar
[98] V., Brailovski, F., Trochu, and G., Daigneault. Temporal characteristics of shape memory linear actuators and application to circuit breakers. Materials and Design, 17(3):151–158, 1996.Google Scholar
[99] J. Y., Lee, G. C., Mcintosh, A. B., Kaiser, W., Park, M., Kaack, J., Pelzl, C. K., Kim, and K., Nahm. Thermopower behavior for the shape memory alloy Ni-Ti. Journal of Applied Physics, 89(11):6223–6227, 2001.Google Scholar
[100] J. M., Gere and B. J., Goodno. Mechanics of Materials, 7th ed. Cengage Learning, Toronto, Canada: 2009.Google Scholar
[101] C., Lexcellent and J., Rejzner. Modeling of the strain rate effect, creep and relaxation of a Ni-Ti shape memory alloy under tension (compression) - torsional proportional loading in the pseudoelastic range. Smart Materials and Structures, 9(5):613–621, 2000.Google Scholar
[102] A. C., Keefe and G. P., Carman. Thermomechanical characterization of shape memory alloy torque tube actuators. Smart Materials and Structures, 9(5):665, 2000.Google Scholar
[103] T. C., Kiesling and C. A., Rogers. Impact failure modes of thin graphite-epoxy composites embedded with superelastic nitinol. Paper # AIAA-I996-I475, Proceedings of the 37th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Salt Lake City, UT, April 1996.Google Scholar
[104] D. C., Lagoudas and I. G., Tadjbakhsh. Deformations of active flexible rods with embedded line actuators. Smart Materials and Structures, 2(2):71, 1993.Google Scholar
[105] C. A., Rogers. Active vibration and structural acoustic control of shape memory alloy hybrid composites : Experimental results. Journal of the Acoustical Society of America, 88(6):2803–2811, 1990.Google Scholar
[106] H., Jia, F., Lalande, R. L., Ellis, and C. A., Rogers. Impact energy absorption of shape memory alloy hybrid composite beams. In Proceedings of the 38th AIAA/ASME/ AHS/ASC Structures, Structural Dynamics and Materials Conference, Kissimmee, FL, pages 917–926, 1999.Google Scholar
[107] S.N., Jung, V. T., Nagaraj, and I., Chopra. Assessment of composite rotor blade modeling techniques. Journal of the American Helicopter Society, 44(3):188–205, 1999.Google Scholar
[108] R., Chandra. Active shape control of composite blades using shape memory actuation. Smart Materials and Structures, 10(5):1018–1024, 2001.Google Scholar
[109] M. M., Ghomshei, A., Khajepour, N., Tabandeh, and K., Behdinan. Finite element modeling of shape memory alloy composite actuators: Theory and experiment. Journal of Intelligent Material Systems and Structures, 12(11):761–773, 2001.Google Scholar
[110] J., Epps and R., Chandra. Shape memory alloy actuation for active tuning of composite beams. Smart Materials and Structures, 6(3):251, 1997.Google Scholar
[111] A., Baz, K., Imam, and J., McCoy. Active vibration control of beams using shape memory actuators. Journal of Sound and Vibration, 140(3):437–456, 1990.Google Scholar
[112] C., Liang, C. A., Rogers, and E., Malafeew. Investigation of shape memory polymers and their hybrid composites. Journal of Intelligent Material Systems and Structures, 8(4):380–386, 1997.Google Scholar
[113] L., Meirovitch. Elements of Vibration Analysis, 2nd ed. McGraw-Hill, Singapore, 1986.Google Scholar
[114] P. K., Mallick. Fiber Reinforced Composite Materials, 2nd ed. Marcel Dekker, New York, 1993.Google Scholar
[115] K., Kimura, T., Asaoka, and K., Funami. Crack arrest effect of Ti-Ni SMA particle dispersed alloy. In Proceedings of the International Conference on Thermomechanical Processing of Steels and Other Materials, THERMEC, volume 2, pages 1675–1680, 1997.Google Scholar
[116] C. M., Friend, A. P., Atkins, and N. B., Morgan. The durability of smart composites containing shape-memory alloy actuators. Journal de Physique IV, 5(C8, p2.):1171–1176, 1995.Google Scholar

Save book to Kindle

To save this book to your Kindle, first ensure coreplatform@cambridge.org is added to your Approved Personal Document E-mail List under your Personal Document Settings on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part of your Kindle email address below. Find out more about saving to your Kindle.

Note you can select to save to either the @free.kindle.com or @kindle.com variations. ‘@free.kindle.com’ emails are free but can only be saved to your device when it is connected to wi-fi. ‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.

Find out more about the Kindle Personal Document Service.

Available formats
×

Save book to Dropbox

To save content items to your account, please confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account. Find out more about saving content to Dropbox.

Available formats
×

Save book to Google Drive

To save content items to your account, please confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account. Find out more about saving content to Google Drive.

Available formats
×