[1]Harvey, A. F., ‘Periodic and guiding structures at microwave frequencies’, IRE Transactions on Microwave Theory and Techniques, vol. 8, pp. 30–61, 1960.
[2]Wang, W. et al., ‘Review of the novel slow-wave structures for high-power traveling-wave tube’, International Journal of Infrared and Millimeter Waves, vol. 24, pp. 1469–1484, 2003.
[3]McLachlan, N. W., Bessel Functions for Engineers. Oxford: Oxford University Press, 1954.
[4]Gilmour, A. S., Jr., Principles of Traveling Wave Tubes. Norwood, MA: Artech House, 1994.
[5]Booske, J. H. et al., ‘Traveling-wave tubes’, in Barker, R. J. et al., eds, Modern Microwave and Millimetre-Wave Power Electronics. Piscataway, NJ: IEEE, pp. 171–245, 2005.
[6]Ramo, S. et al., Fields and Waves in Communication Electronics. New York: Wiley, 1965.
[7]Kosai, H. et al., ‘Plasma-filled dielectric Cherenkov maser’, IEEE Transactions on Plasma Science, vol. 18, pp. 1002–1007, 1990.
[8]Smirnova, E. I. et al., ‘Design, fabrication, and low-power tests of a W-band omniguide traveling-wave tube structure’, IEEE Transactions on Plasma Science, vol. 36, pp. 763–767, 2008.
[9]Shchegolkov, D. Y. et al., ‘Millimeter-wave gain experiments with a wide-band omniguide traveling-wave tube’, in IEEE Thirteenth International Vacuum Electronics Conference (IVEC 2012), pp. 297–298, 2012.
[10]Collin, R. E., Foundations for Microwave Engineering. New York: McGraw-Hill, 1966.
[11]Brillouin, L., Wave Propagation in Periodic Structures. New York: Dover, 1953.
[12]Hamming, R. W., Numerical Methods for Scientists and Engineers. New York: McGraw-Hill, 1973.
[13]Edwards, T., Foundations for Microstrip Circuit Design, 2nd ed. Chichester, UK: Wiley, 1992.
[14]Butcher, P. N., ‘The coupling impedance of tape structures’, Proceedings of the IEE – Part B: Radio and Electronic Engineering, vol. 104, pp. 177–187, 1957.
[15]Weiss, J. A., ‘Dispersion and field analysis of a microstrip meander-line slow-wave structure’, IEEE Transactions on Microwave Theory and Techniques, vol. 22, pp. 1194–1201, 1974.
[16]Karp, A., ‘Traveling-wave tube experiments at millimeter wavelengths with a new, easily built, space harmonic circuit’, Proceedings of the IRE, vol. 43, pp. 41–46, 1955.
[17]Froom, J. et al., ‘Ridge-loaded ladder lines’, IEEE Transactions on Electron Devices, vol. 12, pp. 411–421, 1965.
[18]Ash, E. A. et al., ‘Dispersion and impedance of dielectric-supported ring-and-bar slow-wave circuits’, Proceedings of the Institution of Electrical Engineers, vol. 111, pp. 629–641, 1964.
[19]Courtney, W. E., Printed-Circuit RF-Keyed Crossed-Field Amplifier. Lexington, MA: Lincoln Laboratory, 1975.
[20]Chua, C. and Aditya, S., ‘A 3-D U-shaped meander-line slow-wave structure for traveling-wave-tube applications’, IEEE Transactions on Electron Devices, vol. 60, pp. 1251–1256, 2013.
[21]Potter, B. R. et al., ‘High-power printed circuit traveling wave tubes’, in International Electron Devices Meeting, pp. 521–524, 1973.
[22]Sengele, S. et al., ‘Microfabrication and characterization of a selectively metallized W-band meander-line TWT circuit’, IEEE Transactions on Electron Devices, vol. 56, pp. 730–737, 2009.
[23]Sumathy, M. et al., ‘Design and RF characterization of W-band meander-line and folded-waveguide slow-wave structures for TWTs’, IEEE Transactions on Electron Devices, vol. 60, pp. 1769–1775, 2013.
[24]Beck, A. H. W., Space-Charge Waves and Slow Electromagnetic Waves. London: Pergamon Press, 1958.
[25]Fletcher, R. C., ‘A broad-band interdigital circuit for use in traveling-wave-type amplifiers’, Proceedings of the IRE, vol. 40, pp. 951–958, 1952.
[26]Arnaud, J., ‘Circuits of travelling wave crossed field tubes’, in Okress, E. et al., eds, Crossed-Field Microwave Devices, vol. 1. New York: Academic Press, pp. 47–67, 1961.
[27]Xie, K., ‘CVD diamond rod and its application in the high power TWT’, in Conference Digest: 25th International Conference on Infrared and Millimeter Waves, pp. 343–344, 2000.
[28]Fleury, G. et al., ‘Average power limits of brazed-helix TWT’s’, in International Electron Devices Meeting, pp. 806–809, 1980.
[29]Crivello, R. and Grow, R. W., ‘Thermal analysis of PPM-focused rod-supported TWT helix structures’, IEEE Transactions on Electron Devices, vol. 35, pp. 1701–1720, 1988.
[30]Han, Y. et al., ‘Thermal analysis of a helix TWT slow-wave structure’, IEEE Transactions on Electron Devices, vol. 55, pp. 1269–1272, 2008.
[31]Paik, S. F., ‘Design formulas for helix dispersion shaping’, IEEE Transactions on Electron Devices, vol. 16, pp. 1010–1014, 1969.
[32]Tsutaki, K. et al., ‘Numerical analysis and design for high-performance helix traveling-wave tubes’, IEEE Transactions on Electron Devices, vol. 32, pp. 1842–1849, 1985.
[33]Basu, B., ‘Equivalent circuit analysis of a dielectric-supported helix in a metal shell’, International Journal of Electronics, vol. 47, pp. 311–314, 1979.
[34]Pierce, J. R., Traveling-Wave Tubes. Princeton, NJ: D. van Nostrand, 1950.
[35]Loshakov, L. and Ol’Derogge, E., ‘Propagation of slow electromagnetic waves along a helix with dielectric supports’, Radio Engineering and Electronic Physics, vol. 13, pp. 45–51, 1968.
[36]Jain, P. K. and Basu, B. N., ‘The inhomogeneous dielectric loading effects of practical helix supports on the interaction impedance of the slow-wave structure of a TWT’, IEEE Transactions on Electron Devices, vol. 39, pp. 727–733, 1992.
[37]Hammond, P. and Sykulski, J. K., ‘Tubes and slices: a new way of teaching the principles of electric and magnetic fields’, IEEE Transactions on Education, vol. 35, pp. 300–306, 1992.
[38]Chen, Q., ‘Characteristic of vane-loaded helix slow-wave structure’, in Vakuumelektronik und Displays, Garmisch-Partenkirchen, Germany, pp. 27–31, 1983.
[39]Sensiper, S., ‘Electromagnetic wave propagation on helical structures (a review and survey of recent progress)’, Proceedings of the IRE, vol. 43, pp. 149–161, 1955.
[40]Sensiper, S., ‘Electromagnetic wave propagation in helical structures’, ScD, Department of Electrical Engineering, MIT, 1951.
[41]Stark, L., ‘Lower modes of a concentric line having a helical inner conductor’, Journal of Applied Physics, vol. 25, pp. 1155–1162, 1954.
[42]Watkins, D. A. and Ash, E. A., ‘The helix as a backward-wave circuit structure’, Journal of Applied Physics, vol. 25, pp. 782–790, 1954.
[43]Jain, P. K. et al., ‘Effect of the finite thickness of the helix wire on the characteristics of the helical slow-wave structure of a traveling-wave tube’, IEEE Transactions on Electron Devices, vol. 34, pp. 1209–1213, 1987.
[44]Swift-Hook, D. T., ‘Dispersion curves for a helix in a glass tube’, Proceedings of the IEE – Part B: Radio and Electronic Engineering, vol. 105, pp. 747–755, 1958.
[45]Sinha, A. K. et al., ‘Simplified tape model of arbitrarily-loaded helical slow-wave structures of a travelling-wave tube’, IEE Proceedings H: Microwaves, Antennas and Propagation, vol. 139, pp. 347–350, 1992.
[46]Ghosh, S. et al., ‘Rigorous tape analysis of inhomogeneously-loaded helical slow-wave structures’, IEEE Transactions on Electron Devices, vol. 44, pp. 1158–1168, 1997.
[47]D’Agostino, S. et al., ‘Accurate analysis of helix slow-wave structures’, IEEE Transactions on Electron Devices, vol. 45, pp. 1605–1613, 1998.
[48]Chernin, D. et al., ‘Exact treatment of the dispersion and beam interaction impedance of a thin tape helix surrounded by a radially stratified dielectric’, IEEE Transactions on Electron Devices, vol. 46, pp. 1472–1483, 1999.
[49]Kalyanasundaram, N. and Babu, G. N., ‘Dispersion of electromagnetic waves guided by an open tape helix I’, Progress In Electromagnetics Research B, vol. 16, pp. 311–331, 2009.
[50]Kalyanasundaram, N. and Babu, G. N., ‘Dispersion of electromagnetic waves guided by an open tape helix II’, Progress In Electromagnetics Research B, vol. 19, pp. 133–150, 2010.
[51]Kalyanasundaram, N. et al., ‘On the distribution of current on an open tape helix’, Progress In Electromagnetics Research M, vol. 12, pp. 81–93, 2010.
[52]Greninger, P., ‘Tape helix perturbation including 3-D dielectrics for TWTs’, IEEE Transactions on Electron Devices, vol. 48, pp. 12–23, 2001.
[53]Wessel-Berg, T., ‘CAD of tape helix circuits for traveling wave tubes by convolution methods’, IEEE Transactions on Electron Devices, vol. 51, pp. 1918–1927, 2004.
[54]Aloisio, M. and Sorbello, G., ‘One-third-of-pitch reduction technique for the analysis of ternary azimuthally periodic helical slow-wave structures’, IEEE Transactions on Electron Devices, vol. 53, pp. 1467–1473, 2006.
[55]Kory, C. L., ‘Three-dimensional simulation of helix traveling-wave tube cold-test characteristics using MAFIA’, IEEE Transactions on Electron Devices, vol. 43, pp. 1317–1319, 1996.
[56]Ward, K. and Wlodarczyk, J., ‘Transmission line modelling of helix slow wave structures’, in Technical Digest: International Electron Devices Meeting (IEDM’93), pp. 157–160, 1993.
[57]Kory, C. L. and Dayton, J. A., Jr, ‘Accurate cold-test model of helical TWT slow-wave circuits’, IEEE Transactions on Electron Devices, vol. 45, pp. 966–971, 1998.
[58]Aloisio, M. and Waller, P., ‘Analysis of helical slow-wave structures for space TWTs using 3-D electromagnetic simulators’, IEEE Transactions on Electron Devices, vol. 52, pp. 749–754, 2005.
[59]Onodera, T. and Raub, W., ‘Phase velocity dispersion of a generalized metal-segment-loaded helix as used in broad-band traveling-wave tubes’, IEEE Transactions on Electron Devices, vol. 35, pp. 533–538, 1988.
[60]Carter, R. G. and Wang, P., ‘Equivalent circuit modelling of helix slow-wave structures’, presented at the ESA/NATO 1997 Workshop on Microwave Tubes for Space, Military and Commercial Applications ESTEC, Noordwijk, The Netherlands, 1997.
[61]Carter, R. G. and Wang, P., ‘An equivalent circuit model of helix slow-wave structures’, presented at the Microwaves 94 Workshop on CAE, Modelling and Measurement Verification, London, pp. 85–90, 1994.
[62]Ghosh, T. K. et al., ‘Optimization of coaxial couplers’, IEEE Transactions on Electron Devices, vol. 54, pp. 1753–1759, July 2007.
[63]Kumar, V. et al., ‘Experimental evaluation of lossy coatings of different materials on helix support rods for a high-efficient TWT’, in 14th International Crimean Conference on Microwave and Telecommunication Technology (CriMico 2004), 2004, pp. 648–650.
[64]Gittins, J. F., Power Travelling-Wave Tubes. London: English Universities Press, 1965.
[65]Naidu, V. B. et al., ‘Three-dimensional electromagnetic analysis of attenuator-coated helix support rods of a traveling-wave tube’, IEEE Transactions on Electron Devices, vol. 56, pp. 945–950, 2009.
[66]Goebel, D. M. et al., ‘Gain stability of traveling wave tubes’, IEEE Transactions on Electron Devices, vol. 46, pp. 2235–2244, 1999.
[67]Alaria, M. K. et al., ‘Design of tip loss profile on support rod for a helix TWT’, Journal of Infrared, Millimeter, and Terahertz Waves, vol. 30, pp. 651–656, 2009.
[68]Birdsall, C. K. and Everhart, T. E., ‘Modified contra-wound helix circuits for high-power traveling-wave tubes’, IRE Transactions on Electron Devices, vol. 3, pp. 190–204, 1956.
[69]Nevins, J. E., Jr., ‘An investigation and application of the contrawound helix’, IRE Transactions on Electron Devices, vol. 6, pp. 195–202, 1959.
[70]Lopes, D. T. and Motta, C. C., ‘Characterization of ring-bar and contrawound helix circuits for high-power traveling-wave tubes’, IEEE Transactions on Electron Devices, vol. 55, pp. 2498–2504, 2008.
[71]Datta, S. K. et al., ‘Equivalent circuit analysis of a ring-bar slow-wave structure for high-power traveling-wave tubes’, IEEE Transactions on Electron Devices, vol. 56, pp. 3184–3190, 2009.
[72]Cain, W. N. and Grow, R. W., ‘The effects of dielectric and metal loading on the dispersion characteristics for contrawound helix circuits used in high-power traveling-wave tubes’, IEEE Transactions on Electron Devices, vol. 37, pp. 1566–1578, 1990.
[73]Sengele, S. et al., ‘Backward-wave suppression analysis, and design and fabrication of a prototype millimeter-wave ring-bar slow-wave structure’, IEEE Transactions on Plasma Science, vol. 42, pp. 3949–3960, 2014.
[74]Buck, D. C., ‘Traveling-wave tube interaction circuits’, IEEE Transactions on Electron Devices, vol. 14, pp. 721–723, 1967.
[75]Liu, S., ‘The theory of ring-loop structure’, Scientia Sinica, vol. 20, pp. 679–695, 1977.
[76]Liu, S., ‘Calculation of the parameters for ring-loop traveling wave tube in MMW’, International Journal of Infrared and Millimeter Waves, vol. 21, pp. 1097–1101, 2000.
[77]Vancil, B. K. and Wintucky, E. G., ‘A low cost electrostatically focused TWT’, in Third IEEE International Vacuum Electronics Conference (IVEC 2002), pp. 180–181, 2002.
[78]White, R. M. et al., ‘Properties of ring-plane slow-wave circuits’, IEEE Transactions on Electron Devices, vol. 11, pp. 247–261, 1964.
[79]Dohler, G. et al., ‘Serpentine waveguide TWT’, in International Electron Devices Meeting, pp. 485–488, 1987.
[80]Carter, R. G., ‘An improved equivalent circuit model of folded-waveguide slow-wave structures’, in Vacuum Electronics and Displays, Garmisch-Partenkirchen, Germany, pp. 55–59, 2001.
[81]Booske, J. H. et al., ‘Accurate parametric modeling of folded waveguide circuits for millimeter-wave traveling wave tubes’, IEEE Transactions on Electron Devices, vol. 52, pp. 685–694, 2005.
[82]James, B. G. and Kolda, P., ‘A ladder circuit coupled-cavity TWT at 80–100 GHz’, in 1986 International Electron Devices Meeting, pp. 494–497, 1986.
[83]Bunch, K. J. and Grow, R. W., ‘The helically wrapped circular waveguide’, IEEE Transactions on Electron Devices, vol. 34, pp. 1873–1884, 1987.
[84]Wei, Y. et al., ‘An approach to the analysis of arbitrarily shaped helical groove waveguides’, IEEE Microwave and Guided Wave Letters, vol. 10, pp. 4–6, 2000.
[85]Wang, W. et al., ‘Study of the ridge-loaded helical-groove slow-wave structure’, IEEE Transactions on Microwave Theory and Techniques, vol. 45, pp. 1689–1695, 1997.
[86]Yu, G. et al., ‘Analysis of the coaxial helical-groove slow-wave structure’, IEEE Transactions on Microwave Theory and Techniques, vol. 50, pp. 191–200, 2002.
[87]Carter, R. G. et al., ‘Computer modelling of coupled-cavity slow-wave structures’, in Vakuumelektronik und Displays, Garmish-Partenkirchen, Germany, pp. 69–74, 1995.
[88]Kantrowitz, F. and Tammaru, I., ‘Three-dimensional simulations of frequency-phase measurements of arbitrary coupled-cavity RF circuits’, IEEE Transactions on Electron Devices, vol. 35, pp. 2018–2026, 1988.
[89]Kory, C. L. et al., ‘Simulation of cold-test dispersion and interaction impedances for coupled-cavity tube slow-wave circuits’, in International Electron Devices Meeting 1992 (IEDM ‘92) Technical Digest, pp. 763–766, 1992.
[90]Prince, P. et al., ‘A numerical method for predicting Brillouin plots of coupled cavity circuits’, in International Electron Devices Meeting, pp. 676–679, 1984.
[91]Carter, R. G., ‘Representation of coupled-cavity slow-wave structures by equivalent circuits’, IEE Proceedings I: Solid-State and Electron Devices, vol. 130, pp. 67–72, 1983.
[92]Curnow, H. J., ‘A general equivalent circuit for coupled-cavity slow-wave structures’, IEEE Transactions on Microwave Theory and Techniques, vol. 13, pp. 671–675, 1965.
[93]Fujisawa, K., ‘General treatment of klystron resonant cavities’, IRE Transactions on Microwave Theory and Techniques, vol. MTT-6, pp. 344–358, 1958.
[94]Carter, R. G. and Liu, S. K., ‘Method for calculating the properties of coupled-cavity slow-wave structures from their dimensions’, IEE Proceedings-H Microwaves Antennas and Propagation, vol. 133, pp. 330–334, October 1986.
[95]Chodorow, M. and Nalos, E. J., ‘The design of high-power traveling-wave tubes’, Proceedings of the IRE, vol. 44, pp. 649–659, 1956.
[96]Karp, A., ‘“Comb-Quad” millimeter-wave coupled-cavity TWT interaction structure’, in International Electron Devices Meeting, pp. 325–327, 1981.
[97]Chodorow, M. and Craig, R. A., ‘Some new circuits for high-power traveling-wave tubes’, Proceedings of the IRE, vol. 45, pp. 1106–1118, 1957.
[98]Matthews, P. S. et al., ‘The centipede structure in practical megawatt tubes’, in 8th European Microwave Conference, Paris, France, pp. 753–760, 1978.
[99]Roumbanis, T., ‘Centipede Twystron ® amplifiers and traveling wave tubes for broad-band high-efficiency super-power amplification’, IEEE Transactions on Electron Devices, vol. 16, p. 242, 1969.
[100]Pearce, A. F., ‘A structure, using resonant coupling elements, suitable for a high-power travelling-wave tube’, Proceedings of the IEE – Part B: Radio and Electronic Engineering, vol. 105, pp. 719–726, 1958.
[101]Reeder, T. M., ‘An equivalent circuit for the “Centipede” waveguide’, IEEE Transactions on Microwave Theory and Techniques, vol. 14, pp. 200–205, 1966.
[102]Wiejak, W., ‘X-band coupled cavity slow wave structure of the traveling wave tube for airborne application’, in 18th International Conference on Microwave Radar and Wireless Communications (MIKON), pp. 1–4, 2010.
[103]Kageyama, T., ‘The design of the transition region in coupled-cavity TWT’, in Third IEEE International Vacuum Electronics Conference (IVEC 2002), pp. 102–103, 2002.
[104]Faillon, G. et al., ‘Microwave tubes’, in Eichmeier, J. A. and Thumm, M. K., eds, Vacuum Electronics: Components and Devices. Berlin: Springer-Verlag, pp. 1–84, 2008.
[105]Horsley, A. W. and Pearson, A., ‘Measurement of dispersion and interaction impedance characteristics of slow-wave structures by resonance methods’, IEEE Transactions on Electron Devices, vol. 13, pp. 962–969, 1966.
[106]Connolly, D. J., ‘Correction to “Determination of the interaction impedance of coupled cavity slow wave structures”’, IEEE Transactions on Electron Devices, vol. 23, p. 1195, 1976.
[107]Connolly, D. J., ‘Determination of the interaction impedance of coupled cavity slow wave structures’, IEEE Transactions on Electron Devices, vol. 23, pp. 491–493, 1976.
[108]Wang, P. et al., ‘An improved technique for measuring the Pierce impedance of helix slow-wave structures’, in 24th European Microwave Conference, pp. 998–1003, 1994.
[109]Rao, S. J. et al., ‘Nonresonant perturbation measurements on dispersion and interaction impedance characteristics of helical slow-wave structures’, IEEE Transactions on Microwave Theory and Techniques, vol. 45, pp. 1585–1593, 1997.
[110]Wang, P. et al., ‘A simple technique for measuring the interaction impedance of helical slow-wave structures’, in Vakuumelektronik und Displays, Garmisch-Partenkirchen, Germany, pp. 63–69, 1995.
[111]Maharaj, B. T. J. and Schumann, E. W., ‘Automated measurement methods to characterise travelling-wave tube slow-wave structures’, Elektron (South Africa), vol. 6, pp. 8–10, 1989.
[112]Legarra, J. R., ‘Measurement of microwave characteristics of helix traveling wave circuits’, in International Electron Devices Meeting, pp. 408–411, 1979.
[113]Lagerstrom, R. P., ‘Interaction impedance measurements by perturbation of traveling waves’, Electronics Research Lab., Stanford University, Stanford, CA, 1957.
[114]Kino, G. S., ‘Normal mode theory in perturbed transmission systems’, Electronics Research Labs., Stanford University, Stanford, CA, 1955.