1.Eastlake, A., Hodson, L., Geraci, C., and Crawford, C. (2012). A critical evaluation of material safety data sheets (MSDSs) for engineered nanomaterials. Journal of Chemical Health and Safety 19(5), 1–8.
2.Roes, L., Patel, M. K., Worrell, E., and Ludwig, C. (2012). Preliminary evaluation of risks related to waste incineration of polymer nanocomposites. The Science of the Total Environment 417–418, 76–86.
4.AHHS, CDC, and NIOSH (2011). Occupational exposure to titanium dioxide. Current Intelligence Bulletin 63, NIOSH Publication No. 2011-160. Atlanta, GA: National Institute for Occupational Safety and Health (NIOSH).
5.Colvin, V. L. (2003). The potential environmental impact of engineered nanomaterials. Nature Biotechnology 21(10), 1166–1170.
6.AHHS, CDC and NIOSH (2013). Occupational exposure to carbon nanotubes and nanofibers. Current Intelligence Bulletin 65, NIOSH Publication No. 2013-145. Atlanta, GA: National Institute for Occupational Safety and Health (NIOSH).
7.Muller, J., Huaux, F., Moreau, N., Misson, P., Heilier, J.-F., et al. (2005). Respiratory toxicity of multi-wall carbon nanotubes. Toxicology and Applied Pharmacology 207(3), 221–231.
8.Deguchi, S., Alargova, R. G., and Tsujii, K. (2001). Stable dispersions of fullerenes C60 and C70 in water: Preparation and characterization. American Chemical Society 17(19), 6013–6017.
9.Hidaka, H., Horikoshi, S., Serpone, N., and Knowland, J. (1997). Inorganic sunscreen agent on exposure to UVA and UVB radiation. Journal of Photochemistry and Photobiology A: Chemistry 111, 205–213.
10.Bolton, J. D. (2002). Problems with wear in artificial orthopaedic joint replacements: A review. Key Engineering Materials 230–232, 447–454.
11.Wang, I. C., Tai, L. A., Lee, D. D., Kanakamma, P. P., Shen, C. K., et al. (1999). C(60) and water-soluble fullerene derivatives as antioxidants against radical-initiated lipid peroxidation. Journal of Medicinal Chemistry 42(22), 4614–4620.
12.Ros, T. D., Prato, M., Farmaceutiche, S., Trieste, U., and Europa, P. (1999). Medicinal chemistry with fullerenes and fullerene derivatives. Chemical Communications 8, 663–669.
13.Koo, J. H., Natali, M., Tate, J., and Allcorn, E. (2013). Polymer nanocomposites as advanced ablatives – A compressive review. International Journal of Energetic Materials and Chemical Propulsion 12(2), 119–162.
14.Okamoto, M. and John, B. (2013). Synthetic biopolymer nanocomposites for tissue engineering scaffolds. Progress in Polymer Science 38(10–11), 1487–1503.
15.Fukushima, K., Rasyida, A., and Yang, M.-C. (2013). Characterization, degradation and biocompatibility of PBAT based nanocomposites. Applied Clay Science 80–81, 291–298.
16.Fukushima, K., Wu, M.-H., Bocchini, S., Rasyida, A., and Yang, M.-C. (2012). PBAT based nanocomposites for medical and industrial applications. Materials Science and Engineering, Part C 32(6), 1331–1351.
17.Park, H.-M., Misra, M., Drzal, L. T., and Mohanty, A. K. (2004). “Green” nanocomposites from cellulose acetate bioplastic and clay: effect of eco-friendly triethyl citrate plasticizer. Biomacromolecules 5(6), 2281–2288.
18.SIGMA-ALDRICH (2013). MSDS for Carbon Nanopowder, 1–6.
21.Stec, A. and Hull, T. (2007). Toxic combustion products from fire retarded nanocomposite polymers. Proceedings of the 5th International Seminar on Fire and Explosion Hazards, Edinburgh, UK, pp. 23–27.
22.Hull, T., Price, D., Liu, Y., Wills, C., and Brady, J. (2003). An investigation into the decomposition and burning behaviour of ethylene-vinyl acetate copolymer nanocomposite materials. Polymer Degradation and Stability 82, 365–371.
23.Stec, A. and Rhodes, J. (2011). Smoke and hydrocarbon yields from fire retarded polymer nanocomposites. Polymer Degradation and Stability 96, 295–300.
24.Rhodes, J., Smith, C., and Stec, A. (2011). Characterisation of soot particulates from fire retarded and nanocomposite materials and their toxicological impact. Polymer Degradation and Stability 96, 277–284.
25.Samyn, F., Bourbigot, S., Jama, C., Bellayer, S., Nazare, S., et al. (2008). Characterisation of the dispersion in polymer flame retarded nanocomposites. European Polymer Journal 44, 1631–1641.
26.Feng, J., Hao, J., Du, J., and Yang, R. (2012). Using TGA/FTIR TGA/MS and cone calorimetry to understand thermal degradation and flame retardancy mechanism of polycarbonate filled with solid bisphenol A bis(diphenyl phosphate) and montmorillonite. Polymer Degradation and Stability 97, 605–614.
27.Didane, N., Giraud, S., Devaux, E., Lemort, G., and Capon, G. (2012). Thermal and fire resistance of fibrous materials made by PET containing fiame retardant agents. Polymer Degradation and Stability 97, 2545–2551.
28.Calogine, D., Marlair, G., Bertrand, J.-P., Duplantier, S., Lopez-Cuesta, J.-M., et al. (2011). Gaseous effluents from the combustion of nanocomposites in controlled-ventilation conditions. Journal of Physics: Conference Series 304, 12–19.
29.Stec, A., Hull, R., and Lebek, K. (2008). Characterization of the steady state tube furnace (ISO TS 19700) for fire toxicity assessment. Polymer Degradation and Stability 93, 2058–2065.
30.Stec, A. and Hull, R. (2009). Assessment of fire toxicity from polymer nanocomposites. In Fire Retardancy of Polymers: New Strategies and Mechanisms, T. R. Hull and B. K. Kandola (Eds.), Cambridge, UK: Royal Society of Chemistry Publishing, pp. 405–417.
31.Stec, A. and Hull, R. (2008). Effect of fire retardants and nanofillers on the fire toxicity of four common polymers. American Chemical Society, 342–366.
32.Valverde, J. and Linkov, I. (2011). Nanotechnology: Risk assessment and risk management perspective. Nanotechnology Law and Business 25, 1–4.
33.Holdren, J., Sunstein, C., and Siddiqui, I. (2011). Policy principles for the U.S. decision-making concerning regulation and oversight of applications of nanotechnology and nanomaterials. Memorandum for the Heads of Executive Departments and Agencies, 1–4.
34.Medley, T. and Walsh, S. (2007). Defense – Nano risk framework. DuPont Nano Partnership, 23–75.
35.Bergeson, L. (2011). Emerging nanomaterial governance systems: The state of play. Molecular Imaging 10, 17–27.
36.Musee, N. (2010). Simulated environmental risk estimation of engineered nanomaterial: A case of cosmetics in Johannesburg City. Human and Experimental Toxicology 30, 1181–1195.
37.Alfadul, S. and Elneshwy, A. (2010). Use of nanotechnology in food processing, packaging, and safety – A review. African Journal of Food, Agriculture, Nutrition, and Development 10, 2719–2739.
38.Simon, P., Chaudhry, Q., and Bakos, D. (2008). Migration of engineered nanoparticles from polymer packaging to food-a physicochemical view. Journal of Food and Nutritional Research 47(3), 105–113.
39.Cushen, M., Kerry, J., Morris, M., Cruz-Romero, M., and Cummins, E. (2012). Nanotechnologies in the food industry – Recent developments, risks, and regulation. Trends in Food Science & Technology 24, 30–46.
40.Health and Safety Executive (HSE) (2006). Review of the adequacy of current regulatory regimes to secure effective regulation of nanoparticles created by nanotechnology.
41.Chen, H., Weiss, J., and Shahidi, F. (2006). Nanotechnology in nutraceuticals and functional foods. Food Technology 3, 30–36.
42.Jani, P., Halbert, G. W., Langridge, J., and Florence, A. T. (1990). Nanoparticle uptake by the rat gastrointestinal mucosa: quantitation and particle size dependency. Journal of Pharmacy and Pharmacology 42, 821–826.
44.Chau, C., Wu, S., and Yen, G. (2007). The development of regulations for food nanotechnology. Trends in Food Science & Technology 18, 269–280.
45.Bowman, D. and Hodge, G. (2008). “Governing” nanotechnology without government? Science and Public Policy 35, 475–487.
46.Soundrapandian, C., Bharati, S., Basu, D., and Datta, S. (2011). Studies on novel bioactive glasses and bioactive glass-nano-hap composites suitable for coating on metallic implants. Ceramics International 37, 759–769.
47.Berger, F., Gevers, S., Siep, L., and Weltring, K. (2008). Ethical, legal and social aspects of brain-implants using nano-scale materials and techniques. Nanoethics 2, 241–249.
48.Culliton, B. (2008). Is special FDA regulation of nanomedicine needed? A conversation with Norris E. Alderson. Health Affairs 27, 315–317.
49.Doak, S., Manshian, B., Jenkins, G., and Singh, N. (2012). In vitro genotoxicity testing strategy for nanomaterials and the adaptation of current OECD guidelines. Mutation Research 745, 104–111.