Skip to main content Accessibility help
×
Home
  • Print publication year: 2015
  • Online publication date: May 2018

5 - Classical Linear Theory Computational Aerodynamics

References
De Resende, O.C., “The Evolution of the Aerodynamic Design Tools and Transport Aircraft Wings at Embraer,” Journal of the Brazilian Society of Mechanical Science and Engineering, Vol. 26, No. 4, 2004, pp. 379–390.
Bertin, J.J., and Cummings, R.M., Aerodynamics for Engineers, 6th Ed., Upper Saddle River: Pearson, 2014.
Erickson, L.L., “Panel Methods – An Introduction,” NASA TP-2995, December 1990.
Hess, J.L., “Panel Methods in Computational Fluid Dynamics,” Annual Review of Fluid Mechanics, Vol. 22, 1990, pp. 255–274.
Hess, J.L., “Linear Potential Schemes,” in Applied Computational Aerodynamics, Ed. Henne, P.A., Reston: AIAA, 1990.
Katz, J., and Plotkin, A., Low-Speed Aerodynamics, 2nd Ed., Cambridge: Cambridge University Press, 2001.
Moran, J., An Introduction to Theoretical and Computational Aerodynamics, New York: Dover Publications, 2010.
Cebeci, T., An Engineering Approach to the Calculation of Aerodynamic Flows, Long Beach: Horizon Publishing, 1999.
Karamcheti, K., Principles of Ideal-Fluid Aerodynamics, 2nd Rev. Ed., Melbourne: Krieger Publishing, 1980.
Hildebrand, F.B., Advanced Calculus for Applications, 2nd Ed., Englewood Cliffs: Prentice-Hall, 1976.
Ashley, H., and Landahl, M., Aerodynamics of Wings and Bodies, Reading: Addison-Wesley, 1965.
Curle, N., and Davis, H.J., Modern Fluid Dynamics, Volume 1: Incompressible Flow, London: Van Nostrand, 1968.
Neal, D., PhD candidate, Virginia Tech, 2007, private communication.
Smith, A.M.O., “The Panel Method: Its Original Development,” in Applied Computational Aerodynamics, ed. Henne, P.A., Reston: AIAA, 1990.
Houghton, E.L., and Carpenter, P.W., Aerodynamics for Engineering Students, 4th Ed., New York: Halsted Press, 1993.
Kuethe, A.M., and Chow, C-Y., Foundations of Aerodynamics, 5th Ed., New York: John Wiley, 1998, pp. 156–164.
Wauquiez, C., , Pablo theory described as part of his Licentiate’s Thesis, “Shape Optimization of Low Speed Airfoils using MATLAB and Automatic Differentiation,” KTH, Stockholm, 2000.
Drela, M., “XFOIL: An Analysis and Design System for Low Reynolds Number Airfoils,” in Low Reynolds Number Aerodynamics, Ed. Mueller, T.J., Lecture Notes in Engineering No. 54, Berlin: Springer Verlag, 1989.
Abbott, I.H., and von Doenhoff, A.E., Theory of Wing Sections, New York: Dover Publications, 1959.
Stack, J., Lindsey, W.F., and Littell, R.E., “The Compressibility Burble and the Effect of Compressibility on Pressures and Forces Acting on an Airfoil,” NACA R-646, 1938.
Jameson, A., “Acceleration of Transonic Potential Flow Calculations on Arbitrary Meshes by the Multiple Grid Method,” AIAA Paper 79–1458, July 1979.
Kroo, I., “Aerodynamic Analyses for Design and Education,” AIAA Paper 92–2664, June 1992.
Volpe, G., “Inverse Airfoil Design: A Classical Approach Updated for Transonic Applications,” in Applied Computational Aerodynamics, Ed. Henne, P.A., Reston: AIAA, New York, 1990.
Labrujere, T.E., and Sloof, J.W., “Computational Methods for the Aerodynamic Design of Aircraft Components,” Annual Review of Fluid Mechanics, Vol. 25, 1993, pp. 183–214.
Bristow, D.R., “A New Surface Singularity Method for Multi-Element Airfoil Analysis and Design,” AIAA Paper 76–0020, January 1976.
Aidala, P.V., Davis, W.H., and Mason, W.H., “Smart Aerodynamic Optimization,” AIAA Paper 83–1863, July 1983.
PAN AIR User’s Class Short Course Presentation Material, NASA Ames Research Center 1981.
Hess, J.L., “The Problem of Three-Dimensional Lifting Potential Flow and Its Solution by Means of Surface Singularity Distributions,” Computer Methods in Applied Mechanics and Engineering, Vol. 4, 1974, pp. 283–319.
Carmichael, R.L., and Erickson, L.L., “PAN AIR – A Higher Order Panel Method for Predicting Subsonic or Supersonic Linear Potential Flows About Arbitrary Configurations,” AIAA Paper 81–1255, June 1981.
Nathman, J.K., “Improvement of a Panel Method by Including Panel Warp,” AIAA Paper 2004–0721, January 2004.
Platzer, M., Jones, K., Young, J., and Lai, J., “Flapping Wing Aerodynamics: Progress and Challenges,” AIAA Journal, Vol. 46, No. 9, 2008, pp. 2136–2149.
Tinoco, E.N., Ball, D.N., and Rice, F.A., “PAN AIR Analysis of a Transport High-Lift Configuration,” Journal of Aircraft, Vol. 24, No. 3, 1987, pp. 181–188.
Magnus, A.E., and Epton, M.A., “PAN AIR – A Computer Program for Predicting Subsonic or Supersonic Linear Potential Flows About Arbitrary Configurations Using a Higher Order Panel Method,” Volume I – Theory Document (Version 1.0), NASA CR-3251, April 1980.
Margason, R.J., Kjelgaard, S.O., Sellers, W.L., Morris, C.E.K., Walkley, K.B., and Shields, E.W., “Subsonic Panel Methods – A Comparison of Several Production Codes,” AIAA Paper 85–0280, January 1985.
Ashby, D.L., Dudley, M.R., Iguchi, S.K., Browne, L., and Katz, J., “Potential Flow Theory and Operation Guide for the Panel Code PMARC,” NASA TM 102851, January 1991.
Nathman, J.K., “Subsonic Panel Methods – Second (Order) Thoughts,” AIAA Paper 98–5563. September 1998.
Mason, W.H., and Rosen, B.S., “The COREL and W12SC3 Computer Programs for Supersonic Wing Design and Analysis,” NASA CR-3676, December 1983.
Van Zyl, L.H., “Unsteady Panel Method for Complex Configurations Including Wake Modeling,” Journal of Aircraft, Vol. 45, No. 1, 2008, pp. 276–285.
Hess, J.L., and Smith, A.M.O., “Calculation of Nonlifting Potential Flow About Arbitrary Three-Dimensional Bodies,” Douglas Report ES40622, Douglas Aircraft Company, 1962.
Rubbert, P.E., “Theoretical Characteristics of Arbitrary Wings by a Nonplanar Vortex Lattice Method,” Boeing Report D6-9244, The Boeing Company, 1964.
Woodward, F.A., Tinoco, E.N., and Larsen, J.W., “Analysis and Design of Supersonic Wing-Body Combinations, Including Flow Properties in the Near Field,” Part I – Theory and Application, NASA CR-73106, 1967.
Rubbert, P.E., and Saaris, G.R., “A General Three-Dimensional Potential Flow Method Applied to V/STOL Aerodynamics,” SAE Paper 680304, 1968.
Hess, J.L., “Calculation of Potential Flow About Arbitrary 3-D Lifting Bodies,” Douglas Report MDC-J5679-01, Douglas Aircraft Company October 1972.
Woodward, F.A., “An Improved Method for the Aerodynamic Analysis of Wing-Body-Tail Configurations in Subsonic and Supersonic Flow,” NASA CR-2228, Parts I and II, 1973.
Roberts, A., and Rundle, K., “Computation of First Order Compressible Flow About Wing-Body Configurations,” AERO MA No. 20, British Aircraft Corporation, February 1973.
Mercer, J.E., Weber, J.A., and Lesfor, E.P., “Aerodynamic Influence Coefficient Method Using Singularity Splines,” NASA CR-2423, May 1974.
Morino, L., and Kuo, C.-C., “Subsonic Potential Aerodynamics for Complex Configurations: A General Theory,” AIAA Journal, Vol. 12, No. 2, 1974, pp. 191–197.
Johnson, F.T., and Rubbert, P.E., “Advanced Panel-Type Influence Coefficient Methods Applied to Subsonic Flow,” AIAA Paper 75–0050, January 1975.
Ehlers, F.E., and Rubbert, P.E., “A Mach Line Panel Method for Computing the Linearized Supersonic Flow,” NASA CR-152126, 1979.
Ehlers, F.E., Epton, M.A., Johnson, F.T., Magnus, A.E., and Rubbert, P.E., “A Higher Order Panel Method for Linearized Flow,” NASA CR-3062, 1979.
Bristow, D.R., “Development of Panel Methods for Subsonic Analysis and Design,” NASA CR-3234, 1980.
Hess, J.L., and Friedman, D.M., “An Improved Higher Order Panel Method for Three-Dimensional Lifting Flow,” Douglas Report No. NADC-79277-60, Douglas Aircraft Company, 1981.
Maskew, B., “Prediction of Subsonic Aerodynamic Characteristics: A Case for Lower Order Panel Methods,” Journal of Aircraft, Vol. 19, No. 2, 1982, pp. 157–163.
Coopersmith, R.M., Youngren, H.H., and Bouchard, E.E., “Quadrilateral Element Panel Method (QUADPAN),” Lockheed-California Report LR 29671, 1981.
Falkner, V.M., “The Calculations of Aerodynamic Loading on Surfaces of Any Shape,” British A.R.C. R&M 1910, 1943.
Vortex Lattice Utilization, NASA SP-405, May 1976.
Margason, R.J., and Lamar, J.E., “Vortex-Lattice FORTRAN Program for Estimating Subsonic Aerodynamic Characteristics of Complex Planforms,” NASA TN D-6142, February 1971.
Lamar, J.E., and Gloss, B.B., “Subsonic Aerodynamic Characteristics of Interacting Lifting Surfaces With Separated Flow Around Sharp Edges Predicted by a Vortex-Lattice Method,” NASA TN D-7921, 1975.
Lamar, J.E., and Herbert, H.E., “Production Version of the Extended NASA-Langley Vortex Lattice FORTRAN Computer Program,” Vol. I, User’s Guide, NASA TM-83303, 1982.
Herbert, H.E., and Lamar, J.E., “Production Version of the Extended NASA-Langley Vortex Lattice FORTRAN Computer Program,” Vol. II, Source Code, NASA TM-83304, 1982.
Drela, M., and Youngren, H., “AVL, An Extended Vortex Lattice Method, .
Melin, T., Tornado, .
Miranda, L.R., Eliott, R.D., and Baker, W.M., “A Generalized Vortex Lattice Method for Subsonic and Supersonic Flow Applications,” NASA CR-2865, December 1977.
Albright, A.E., Dixon, C.J., and Hegedus, M.C., “Modification and Validation of Conceptual Design Aerodynamic Prediction Method HASC95 With VTXCHN,” NASA CR-4712, March 1996.
Nathman, J.K., and McComas, A., “Comparison of Stability and Control Calculations from Vortex Lattice and Panel Methods,” AIAA Paper 2008–0314, January 2008.
Lan, C.E., “A Quasi-Vortex-Lattice Method in Thin Wing Theory,” Journal of Aircraft, Vol. 11, No. 9, 1974, pp. 518–527.
Mook, D.T., and Nayfeh, A.H., “Application of the Vortex-Lattice Method to High-Angle-of-Attack Subsonic Aerodynamics,” SAE Paper 851817, October 1985.
Jacob, K., Mason, W.H., Durham, W., Lutze, F., and Benoliel, A., “Control Power Issues in Conceptual Design: Critical Conditions, Estimation Methodology, Spreadsheet Assessment, Trim and Bibliography,” VPI-Aero-200, November 1993. (Software and report available at .)
Tinling, B.E., and Kolk, W.R., “The Effects of Mach Number and Reynolds Number on the Aerodynamic Characteristics of Several 12-Percent-Thick Wings Having 35° of Sweepback and Various Amounts of Camber,” NACA RM-A50K27, February 1951.
Stivers, L.S., “Effectiveness of an All-Movable Horizontal Tail on an Unswept-Wing and Body Combination for Mach Numbers from 0.60 to 1.40,” NASA TN D-13, August 1959.
Abbott, I.H., and Greenberg, H., “Test in the Variable-Density Wind Tunnel of the NACA 23012 Airfoil with Plain and Split Flaps,” NACA Report 661, 1938.
Etkin, B., Dynamics of Flight – Stability and Control, 2nd Ed., New York: John Wiley & Sons, 1982.
Pittman, J.L., and Dillon, J.L., “Vortex Lattice Prediction of Subsonic Aerodynamics of Hypersonic Vehicle Concepts,” Journal of Aircraft, Vol. 14, No. 10, 1977, pp. 1017–1018.
Polhamus, E.C., “Prediction of Vortex Lift Characteristics by a Leading-edge Suction Analogy,” Journal of Aircraft, Vol. 8, No. 4, 1971, pp. 193–199.
Kalman, T.P., Rodden, W.P., and Giesing, J., “Application of the Doublet-Lattice Method to Nonplanar Configurations in Subsonic Flow,” Journal of Aircraft, Vol. 8, No. 6, 1971, pp. 406–415.
Belotserkovskii, S.M., The Theory of Thin Wings in Subsonic Flow, New York: Plenum Press, 1967.
Saunders, G.H., “Aerodynamic Characteristics of Wings in Ground Proximity,” Canadian Aeronautics and Space Journal, Vol. 11, 1965, pp. 185–192.
Hough, G.R., “Remarks on Vortex-Lattice Methods,” Journal of Aircraft, Vol. 10, No. 5, 1973, pp. 314–317.
Albano, E., and Rodden, W.P., “A Doublet-Lattice Method for Calculating Lift Distributions on Oscillating Surfaces in Subsonic Flows,” AIAA Journal, Vol. 7, No. 2, 1969, pp. 279–285; errata AIAA Journal, Vol. 7, No. 11, 1969, p. 2192.
Rodden, W.P., Taylor, P.F., and McIntosh, S.C., Jr., “Further Refinement of the Subsonic Doublet-Lattice Method,” Journal of Aircraft, Vol. 35, No. 5, 1998, pp. 720–727.
Rodden, W.P., Taylor, P.F., McIntosh, S.C., Jr., and Baker, M.L., “Further Convergence Studies of the Enhanced Doublet-Lattice Method,” Journal of Aircraft, Vol. 36, No. 4, 1999, pp. 682–688.
Fritz, T.E., and Long, L.N., “Object-Oriented Unsteady Vortex Lattice Method for Flapping Flight,” Journal of Aircraft, Vol. 41, No. 6, 2004, pp. 1275–1289.
Soviero, P.A., and Hernandes, F., “Compressible Unsteady Vortex Lattice Method for Arbitrary Two-Dimensional Motion of Thin Profiles,” Journal of Aircraft, Vol. 44, No. 5, 2007, pp. 1494–1498.
Stanford, B.K., and Beran, P.S., “Analytical Sensitivity Analysis of an Unsteady Vortex Lattice Method for Flapping Wing Optimization,” AIAA Paper 2009–2614, May 2009.
Shyy, W., Lian, Y., Tang, J., Viiery, D., and Liu, H., Aerodynamics of Low Reynolds Number Flyers, Cambridge: Cambridge University Press, 2008.
Hernandes, F., and Soviero, P.A.O., “Unsteady Aerodynamic Coefficients Obtained by a Compressible Vortex Lattice Method,” Journal of Aircraft, Vol. 46, No. 4, 2009, pp. 1291–1301.
Jacobs, R.B., Ran, H., Kirby, M.R., and Mavris, D.N., “Extension of a Modern Lifting-Line Method to Transonic Speeds and Application to Multiple-Lifting-Surface Configurations,” AIAA Paper 2012–2889, June 2012.
Murua, J., Palacios, R., and Graham, J.M.R., “Applications of the Unsteady Vortex-Lattice Method in Aircraft Aeroelasticity and Flight Dynamics,” Progress in Aerospace Sciences, Vol. 55, 2012, pp. 46–72.
Brandt, S.A., Stiles, R.J., Bertin, J.J., and Whitford, R., Introduction to Aeronautics: A Design Perspective, 2nd Ed., Reston: AIAA, 2004.
Nicolai, L.M., Fundamentals of Aircraft Design, San Jose: METS, Inc., 1975.